当西门子手机被锁时

[dyqz2003]

在这里转 hxxaxx 兄弟的一篇，希望能对机友们有所帮助：

我的SX1买了没几天就因为一次误超作给锁了....那个急呀...送到客服说要返厂..晕 ...
等了15天拿回来后告诉我说搞不定..让我联系经销商..(还把屏幕给我划花了...哼 .幸亏给我免费换了个)..呵呵..相信陈老大还是得交给客服..我闲麻烦..在网上搜了搜西客的网址...到总公司的主页给他们用E文发了封信...没想到几个小时就把解锁码给我发来了!!!我哭...白等了半个多月~~~555


1.网址:http://www.my-siemens.com/mobiles (切记要选择"全球/英语")


2.然后点最上面的"Contact"

3.接下来就要考考大家的E文了..嘿嘿..(别告诉我你不会用金山快译)..

这是我写的内容:
Subject *honecode was locked
Product *: (选择你手机的型号)
Please complete with your message. *这个就是正文了)
First, please allow I thank you and can read I of letter! .My Phone was locked, please help me as possible as you can.
My IMIE这里写上你的机器码)
Your reply of my in hopes of!

Category *:Hardware/Setting
Topic *:Software
First name *这两个不用我教了吧...什么?我的姓名..嘿嘿.保密! )
Last name *:
Country *:选澳大利亚或美国(不能选中国..否则还是上海客服给你答复..我可是很爱国的哦!不要打我啊 )
Email *写上你的邮箱!)

最下面的那个小框框要打上勾啊....切记切记..
好了..一切搞定后就可以点"Send Form"了~~

4.收到解锁码*#0003*xxxxxxxxx#后...插上卡打开机器注意..是插上卡打开机器..屏幕上显示"安全码输入错误超过5次,密码将在5分钟后解除"..然后输入解锁码!就可以解了... 好累啊...有什么不懂的加我QQ28956102问问就可以了~~~再见

 

[wwjlrj]

好办法，我的sx1也被锁，去客服说要返厂，

 

[wwjlrj]

按照上面的办法，收到的是“Hello Mr. Liu,
Thank you for writing Siemens Customer Care.
If I understand your concern correctly, it appears that your Siemens mobile phone is blocked due to exhaustion in the number of tries in entering the phone code.
To resolve this issue, kindly contact your local Siemens subsidiary. Please refer to the link below, and fill up the web form:
Siemens Mobile Phone Portal
- Connect to www.siemens-mobile.com/mobiles
- Click "Customer Care"
- Click "Contact Siemens Online"
Thank you again for your support.
Best Regards,
Melinda
Siemens Customer Care”
没有发现解锁码，本人英文不通，用翻译软件翻的莫名其妙，帮帮忙，帮我拿到解锁码，我的手机串号是：“352079001164878”，感谢！感谢！

 

[suneywang]

我发了，但回信里头没有解锁号码。郁闷～～
楼主，您能帮我弄吗！？
我的IME：352079002781563
谢谢了！！