l 注意在做软件升级的过程中，不要将数据线拔离手机，否则容易损坏机器
It must download Main Code and Flex .Then the mobile phone could be powered on normally.
The default value of language is English.
You also can use other languages with downloading the Language Pack.
Download the Main Code
第一步：加载主程序文件
1. Open mbkit_G2_V42T3.exe（双击此图标，打开下载工具软件）
2. Select COM Port、DL way、Choose
n 根据计算机所连接的串口，选择正确的串口号。
Press “Main Code Change” Icon
3. Select the Main Code’s Path （选择正确的主程序文件）
4. Press “RS232 Loader Change” Icon
5. Select the “r_INTEL_G2_8M_v42T3_all.mot” Loader （选择正确的RS232加载程序文件：r_INTEL_G2_8M_V4.2.1_all.mot）
6. Press the button to start download “Main Code”
7. The monitor will display
8. Press “OK”, then the monitor will display“Converting…”（手机刚开始应处于关机状态，等到软件操作界面出现Status：“Waiting for target ready….”后按下手机的“power-on”键，直到出现“Transmitting Partition 0…”再松开。否则需要从第3部重新开始操作。）
9. Wait a moment，when the monitor displays“Waiting for target ready…”
10. Press “power-on” key of the handset, until the monitor displays“Transmitting Partition 0…”
Release “power-on” key of the handset, the “download” procedure will complete about 10 minutes.
Download the Flex (It must download the Main Code first.)
第二步： 加载用户配置文件（flex）
1. Select COM Port、DL way、Choose （注意有一个选项变为：Flex）
2. Press “Flex Change” Icon
3. Select the Flex’s Path （选择正确的用户配置文件）
4. Press “RS232 Loader Change” Icon
5. Select the “r_INTEL_G2_8M_v42T3_skip.mot” Loader （选择正确的RS232加载程序文件：r_INTEL_G2_8M_v4.2.1_skip.mot）
If you use all mode loader，the Mbkit will not allow and show a warning message.
6. Press the button to start download “Flex”
7. The monitor will display
8. Press “OK”, then the monitor will display“Converting…”
9. Wait a moment，when the monitor displays“Waiting for target ready…”
10. Press “power-on” key of the handset, until the monitor displays“Transmitting Partition 0…”
Release “power-on” key of the handset, the “download” procedure will complete about 1 minutes.
Download the Language Pack
第三步： 加载语言包文件（注意：在完成第二步的操作后，G60手机可能处于开机状态，这时需要将手机关机后再进行第三步操作）
1. Select COM Port、DL way、Choose
2. Press “Flex Change” Icon
3. Select the Language Pack’s Path（选择正确的语言包文件）
4. Press “RS232 Loader Change” Icon
5. Select the “r_INTEL_G2_8M_v42T3_skip.mot” Loader（选择正确的RS232加载程序文件：r_INTEL_G2_8M_v4.2.1_skip.mot）
If you use all mode loader，the Mbkit will not allow and show a warning message.
6. Press the button to start download “Language Pack”
7. The monitor will display
8. Press “OK”, then the monitor will display“Converting…”
9. Wait a moment，when the monitor displays“Waiting for target ready…”
10. Press “power-on” key of the handset, until the monitor displays“Transmitting Partition 0…”
Release “power-on” key of the handset, the “download” procedure wi
It must download Main Code and Flex .Then the mobile phone could be powered on normally.
The default value of language is English.
You also can use other languages with downloading the Language Pack.
Download the Main Code
第一步：加载主程序文件
1. Open mbkit_G2_V42T3.exe（双击此图标，打开下载工具软件）
2. Select COM Port、DL way、Choose
n 根据计算机所连接的串口，选择正确的串口号。
Press “Main Code Change” Icon
3. Select the Main Code’s Path （选择正确的主程序文件）
4. Press “RS232 Loader Change” Icon
5. Select the “r_INTEL_G2_8M_v42T3_all.mot” Loader （选择正确的RS232加载程序文件：r_INTEL_G2_8M_V4.2.1_all.mot）
6. Press the button to start download “Main Code”
7. The monitor will display
8. Press “OK”, then the monitor will display“Converting…”（手机刚开始应处于关机状态，等到软件操作界面出现Status：“Waiting for target ready….”后按下手机的“power-on”键，直到出现“Transmitting Partition 0…”再松开。否则需要从第3部重新开始操作。）
9. Wait a moment，when the monitor displays“Waiting for target ready…”
10. Press “power-on” key of the handset, until the monitor displays“Transmitting Partition 0…”
Release “power-on” key of the handset, the “download” procedure will complete about 10 minutes.
Download the Flex (It must download the Main Code first.)
第二步： 加载用户配置文件（flex）
1. Select COM Port、DL way、Choose （注意有一个选项变为：Flex）
2. Press “Flex Change” Icon
3. Select the Flex’s Path （选择正确的用户配置文件）
4. Press “RS232 Loader Change” Icon
5. Select the “r_INTEL_G2_8M_v42T3_skip.mot” Loader （选择正确的RS232加载程序文件：r_INTEL_G2_8M_v4.2.1_skip.mot）
If you use all mode loader，the Mbkit will not allow and show a warning message.
6. Press the button to start download “Flex”
7. The monitor will display
8. Press “OK”, then the monitor will display“Converting…”
9. Wait a moment，when the monitor displays“Waiting for target ready…”
10. Press “power-on” key of the handset, until the monitor displays“Transmitting Partition 0…”
Release “power-on” key of the handset, the “download” procedure will complete about 1 minutes.
Download the Language Pack
第三步： 加载语言包文件（注意：在完成第二步的操作后，G60手机可能处于开机状态，这时需要将手机关机后再进行第三步操作）
1. Select COM Port、DL way、Choose
2. Press “Flex Change” Icon
3. Select the Language Pack’s Path（选择正确的语言包文件）
4. Press “RS232 Loader Change” Icon
5. Select the “r_INTEL_G2_8M_v42T3_skip.mot” Loader（选择正确的RS232加载程序文件：r_INTEL_G2_8M_v4.2.1_skip.mot）
If you use all mode loader，the Mbkit will not allow and show a warning message.
6. Press the button to start download “Language Pack”
7. The monitor will display
8. Press “OK”, then the monitor will display“Converting…”
9. Wait a moment，when the monitor displays“Waiting for target ready…”
10. Press “power-on” key of the handset, until the monitor displays“Transmitting Partition 0…”
Release “power-on” key of the handset, the “download” procedure wi