E700 手机插头的引脚定义 d500 接口定意 PCB093LBE cable线路图

linufo555

普通会员
2004-12-22
295
0
0
pin in Signal Description
1,2 V_EXT_CHARGE charge input
3 AUX_SPK handsfree speaker out
4 TXD1 serial 2 out for debugging purposes
5 +Vbat accumulator out
6,8,11 GND
7 REC01 power on/off scheme input
9 RXD1 serial 2 in for debugging purposes
10 AUX_MIC handsfree mic in
12 CHARGER_OK power on/off and charging control
13 JIG_REC power on/off scheme control
14 CTS serial 1 CTS
15 RTS serial 1 RTS
16 RxD serial 1in used for data/ flash cable
17 TxD serial 1 out used for data/ flash cable
18 +Vbat accumulator out
 

附件

linufo555

普通会员
2004-12-22
295
0
0
SGH-D500 pinout [ 2005-01-18 0:45:38 AM | Author: GSMCN | From: GSMCN ]
Keypad up, right to left-
1 <-> 14- +Ubat
2- Usb data
3- Usb +5V
4- Usb data
5- Tx (Тх from maxim)
6- Rx (Rx from maxim)
8 <-> 11- GND
 

yicheng

普通会员
2004-12-21
354
0
0
测试:E708(PCB133LBEC)的数据线DIYD500的数据线
把原来的2,3线换到5,6脚就可以了.大家试一下(2-5.3-6).可以刷机
 

linufo555

普通会员
2004-12-22
295
0
0
Keypad up, right to left-
1 <-> 14- +Ubat
2- Usb data
3- Usb +5V
4- Usb data
5- Tx
6- Rx
8 <-> 11- GND



keyboard side
18..................1


18 pin Samsung right-to-left numbering mobile special connector at the mobile phone ? Pin Signal Description

5 Tx-------------- ?? from maxim
6 Rx-------------- Rx from maxim

8,11 short ------------- GND.
.......ok but i have some qestions becouse i can&#39;t meke this work.....
1 <-> 14- +Ubat
2- Usb data /TX or RX?
3- Usb +5V
4- Usb data /TX or RX?
5- Tx
6- Rx
8 <-> 11- GND
this is combo cable /MAX323 + USB/ and if i like to yse it only for unlock i can use only RS232?
 

金色尺度

普通会员
2004-10-18
573
0
0
下面是引用yicheng于2005-02-27 21:44发表的:
测试:E708(PCB133LBEC)的数据线DIYD500的数据线
把原来的2,3线换到5,6脚就可以了.大家试一下(2-5.3-6).可以刷机
别再转了跟本不能用.
 

red_angel

普通会员
2004-05-14
200
0
0
下面是引用linufo555于2005-02-27 18:16发表的E700 手机插头的引脚定义 d500 接口定意 PCB093LBE cable线路图:
pin in Signal Description
1,2 V_EXT_CHARGE charge input
3 AUX_SPK handsfree speaker out
4 TXD1 serial 2 out for debugging purposes
5 +Vbat accumulator out
.......

一个COM一个USB,针脚定义根本不同啊!
 

xtywp

普通会员
2004-03-13
112
0
0
请问您有没有索家K300C的引脚定义图啊,我想自己做一根数据线。