Z
zorro628
游客
6120C 在播放视频时候，后盖没该紧，电池掉了。。结果再开机就白屏。。。。无法进入系统了。
用凤凰出现倒计时。。。试了很多方法还是不行啊
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming 100%
Finished Flashing
Rebooting to RFS Mode
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Starting to recover the phone
Recovering phone
Initializing
Warning: Unable to communicate to product after flashing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
Verifying communication to product (before flash finalizing)
Communication verified
Verifying communication to product (before flash finalizing)
Communication verified
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
Verifying communication to product (before flash finalizing)
Communication verified
Flashing finalization failed. Do you like to retry the finalizing?
HRESULT 0x8421001f (-2078212065)
Firmware: Failed to switch phone to correct mode for fartorysettings using USB.
All operations completed
Firmware updating failed.
用JAF也是到最后出现这。。。 郁闷。。求助大虾。。。
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Second try...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!
用凤凰出现倒计时。。。试了很多方法还是不行啊
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming 100%
Finished Flashing
Rebooting to RFS Mode
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Starting to recover the phone
Recovering phone
Initializing
Warning: Unable to communicate to product after flashing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
Verifying communication to product (before flash finalizing)
Communication verified
Verifying communication to product (before flash finalizing)
Communication verified
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
Verifying communication to product (before flash finalizing)
Communication verified
Flashing finalization failed. Do you like to retry the finalizing?
HRESULT 0x8421001f (-2078212065)
Firmware: Failed to switch phone to correct mode for fartorysettings using USB.
All operations completed
Firmware updating failed.
用JAF也是到最后出现这。。。 郁闷。。求助大虾。。。
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Second try...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!