我安装论坛上的教程刷机,可是都失败,跪求高手帮忙!!
刷机出现的过程:
I E1 22:10:46 OptiFlash 4.51 started
I E2 22:10:48 ThreadGUI started
I E3 22:10:48 ThreadProtocol started
I E4 22:10:48 OS: NT family, Ver:5.1
I E5 22:10:48 Boot loader protocol type: passive
I E6 22:10:48 Memory interface type: 0
I E7 22:10:48 Setup loader: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-1.sre
I E8 22:10:48 Setup loader base addr: 0x04000000
I E9 22:10:48 Flash loader: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-2.sre
I E10 22:10:48 Flash loader base addr: 0x00000000
I E11 22:10:48 Stack base addr: 0x00000000
I E12 22:10:48 Stack buffers: 2
I E13 22:10:48 0: 0x00000000 - 0x00ffffff [16 MB (16777216 Bytes)]
I E14 22:10:48 1: 0x01000000 - 0x01ffffff [16 MB (16777216 Bytes)]
I E15 22:10:48 Opened COM3 at 115200 baud
I E16 22:10:49 PC transfer speeds (COM3): 57600 115200 230400 460800 921600
I E17 22:10:49 Loading S-record file (RangeCheck=Off)
I E18 22:10:49 File: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-1.sre
I E19 22:10:49 SRE line 178: IGNORING: S70504001000E6
I E20 22:10:49 There is 1 memory region in the S-record file:
I E21 22:10:49 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E22 22:10:49 Loading S-record file (RangeCheck=Off)
I E23 22:10:49 File: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-2.sre
I E24 22:10:50 SRE line 1179: IGNORING: S70500000000FA
I E25 22:10:50 There is 1 memory region in the S-record file:
I E26 22:10:50 1: 0x00000000 - 0x00004993 = 18836 Bytes
I E27 22:10:50 Loading S-record file (RangeCheck=On)
I E28 22:10:50 File: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\BLUESHOW-P738ZCEA2.sre
I E29 22:10:50 SRE line 1: IGNORING: S00600004844521B
I E30 22:10:55 SRE line 1609714: IGNORING: S705A002000058
I E31 22:10:55 There are 2 memory regions in the S-record file:
I E32 22:10:55 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E33 22:10:55 2: 0x00004000 - 0x01891ef8 = 25747193 Bytes
I E34 22:10:55 SendFile=C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-2.sre, Mode=3
I E35 22:10:55 Power on mobile !
I E36 22:10:55 TalkToBootLoader (using COM3)
I E37 22:10:55 Talking to passive bootloader
I E38 22:11:00 Bootloader V2.2 using UART0
I E39 22:11:00 ROM mask ID: 0x00004546 ( EF)
I E40 22:11:00 ID register: 0x000603bd (Trident II)
I E41 22:11:00 Bootloader type: 3 (0)
I E42 22:11:00 Max. transfer size: 2176 bytes
I E43 22:11:00 Adjusted max. transfer size to: 1920 bytes
I E44 22:11:00 Data to transfer: 18836 bytes in 1 region(s)
I E45 22:11:00 Send: 0x00000000 - 0x0000077f (=1920)
I E46 22:11:00 Send: 0x00000780 - 0x00000eff (=1920)
I E47 22:11:01 Send: 0x00000f00 - 0x0000167f (=1920)
I E48 22:11:02 Send: 0x00001680 - 0x00001dff (=1920)
I E49 22:11:02 Send: 0x00001e00 - 0x0000257f (=1920)
I E50 22:11:03 Send: 0x00002580 - 0x00002cff (=1920)
I E51 22:11:03 Send: 0x00002d00 - 0x0000347f (=1920)
I E52 22:11:04 Send: 0x00003480 - 0x00003bff (=1920)
I E53 22:11:05 Send: 0x00003c00 - 0x0000437f (=1920)
I E54 22:11:05 Send: 0x00004380 - 0x00004993 (=1556)
I E55 22:11:06 TalkToBootloader: OK
I E56 22:11:06 Duration: 10s
I E57 22:11:06 SendFile=C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\BLUESHOW-P738ZCEA2.sre, Mode=0
I E58 22:11:06 TalkToFlashloader (using COM3)
I E59 22:11:06 Switching over to flash loader
I E60 22:11:11 SendFile: 5 (ERR_PROTOCOL)
I E61 22:11:11 ReLoad: 5 (ERR_PROTOCOL)
I E62 22:11:11 Error code: ERR_PROTOCOL
E E63 22:11:11 Sorry, an error has occured ! (ERR_PROTOCOL)
I E64 22:11:11 ThreadProtocol finished
I E65 22:11:11 ThreadProtocol: 5
I E66 22:11:11 ThreadGUI finished
数据线是用E818
刷机出现的过程:
I E1 22:10:46 OptiFlash 4.51 started
I E2 22:10:48 ThreadGUI started
I E3 22:10:48 ThreadProtocol started
I E4 22:10:48 OS: NT family, Ver:5.1
I E5 22:10:48 Boot loader protocol type: passive
I E6 22:10:48 Memory interface type: 0
I E7 22:10:48 Setup loader: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-1.sre
I E8 22:10:48 Setup loader base addr: 0x04000000
I E9 22:10:48 Flash loader: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-2.sre
I E10 22:10:48 Flash loader base addr: 0x00000000
I E11 22:10:48 Stack base addr: 0x00000000
I E12 22:10:48 Stack buffers: 2
I E13 22:10:48 0: 0x00000000 - 0x00ffffff [16 MB (16777216 Bytes)]
I E14 22:10:48 1: 0x01000000 - 0x01ffffff [16 MB (16777216 Bytes)]
I E15 22:10:48 Opened COM3 at 115200 baud
I E16 22:10:49 PC transfer speeds (COM3): 57600 115200 230400 460800 921600
I E17 22:10:49 Loading S-record file (RangeCheck=Off)
I E18 22:10:49 File: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-1.sre
I E19 22:10:49 SRE line 178: IGNORING: S70504001000E6
I E20 22:10:49 There is 1 memory region in the S-record file:
I E21 22:10:49 1: 0x04001000 - 0x04001b03 = 2820 Bytes
I E22 22:10:49 Loading S-record file (RangeCheck=Off)
I E23 22:10:49 File: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-2.sre
I E24 22:10:50 SRE line 1179: IGNORING: S70500000000FA
I E25 22:10:50 There is 1 memory region in the S-record file:
I E26 22:10:50 1: 0x00000000 - 0x00004993 = 18836 Bytes
I E27 22:10:50 Loading S-record file (RangeCheck=On)
I E28 22:10:50 File: C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\BLUESHOW-P738ZCEA2.sre
I E29 22:10:50 SRE line 1: IGNORING: S00600004844521B
I E30 22:10:55 SRE line 1609714: IGNORING: S705A002000058
I E31 22:10:55 There are 2 memory regions in the S-record file:
I E32 22:10:55 1: 0x00000000 - 0x00001fff = 8192 Bytes
I E33 22:10:55 2: 0x00004000 - 0x01891ef8 = 25747193 Bytes
I E34 22:10:55 SendFile=C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\optiflash-p730\Models\sgh-p730-gsmcn-2.sre, Mode=3
I E35 22:10:55 Power on mobile !
I E36 22:10:55 TalkToBootLoader (using COM3)
I E37 22:10:55 Talking to passive bootloader
I E38 22:11:00 Bootloader V2.2 using UART0
I E39 22:11:00 ROM mask ID: 0x00004546 ( EF)
I E40 22:11:00 ID register: 0x000603bd (Trident II)
I E41 22:11:00 Bootloader type: 3 (0)
I E42 22:11:00 Max. transfer size: 2176 bytes
I E43 22:11:00 Adjusted max. transfer size to: 1920 bytes
I E44 22:11:00 Data to transfer: 18836 bytes in 1 region(s)
I E45 22:11:00 Send: 0x00000000 - 0x0000077f (=1920)
I E46 22:11:00 Send: 0x00000780 - 0x00000eff (=1920)
I E47 22:11:01 Send: 0x00000f00 - 0x0000167f (=1920)
I E48 22:11:02 Send: 0x00001680 - 0x00001dff (=1920)
I E49 22:11:02 Send: 0x00001e00 - 0x0000257f (=1920)
I E50 22:11:03 Send: 0x00002580 - 0x00002cff (=1920)
I E51 22:11:03 Send: 0x00002d00 - 0x0000347f (=1920)
I E52 22:11:04 Send: 0x00003480 - 0x00003bff (=1920)
I E53 22:11:05 Send: 0x00003c00 - 0x0000437f (=1920)
I E54 22:11:05 Send: 0x00004380 - 0x00004993 (=1556)
I E55 22:11:06 TalkToBootloader: OK
I E56 22:11:06 Duration: 10s
I E57 22:11:06 SendFile=C:\Documents and Settings\user\桌面\新建文件夹 (2)\BLUESHOW-P738ZCEA2\BLUESHOW-P738ZCEA2.sre, Mode=0
I E58 22:11:06 TalkToFlashloader (using COM3)
I E59 22:11:06 Switching over to flash loader
I E60 22:11:11 SendFile: 5 (ERR_PROTOCOL)
I E61 22:11:11 ReLoad: 5 (ERR_PROTOCOL)
I E62 22:11:11 Error code: ERR_PROTOCOL
E E63 22:11:11 Sorry, an error has occured ! (ERR_PROTOCOL)
I E64 22:11:11 ThreadProtocol finished
I E65 22:11:11 ThreadProtocol: 5
I E66 22:11:11 ThreadGUI finished
数据线是用E818