MultiLoader per SGH-Z500 (e SGH-Z140, SGH-Z300 e SGH-ZM60) versione 1.6
Avviare MultiLoader 1.6
Adesso prendete come riferimento lo schema qui sotto,
cliccate sui pulsanti con il nome specificato a sinistra
e selezionate i file indicati a destra (che sono nella cartella da voi prima creata).
Boot Loader -> BOOT_LOADER.bin
USB Boot -> usbboot_z500_d05.bin
MODEM Code -> TMQZS.bin
SHP Rsrc1 -> Rsrc_Z500_TIM.cnt
SHP Rsrc2 -> Rsrc2_low(100).cnt
SHP FileSys -> FactoryFs_Z500_TIM.bin
EFS -> NON DEVE ESSERE SPECIFICATO
Input address NON DEVE ESSERE SELEZIONATO
---------------------------------------------------------------------------------------------------------------------
Now to keep it short close down all programs that you can including the ones next to the clock. Especially antivirus programs etc.
Connect the phone througt USB and install the drivers. Disconnect it.
Take out your simcard. While the phone is powered down press and hold key 9 and then start the phone. The main screen should be white and the small should say DOWNLOAD with red background.
Unpack the firmware and start MultiLoader.
Click "Search Port". The COM port should be available below. Select it.
Now select the files as following:
Boot Loader -> BOOT_LOADER.bin
USB Boot -> usbboot_z500_d05.bin
MODEM Code -> TMQZS.bin
SHP Rsrc1 -> Rsrc_Z500_*.cnt
SHP Rsrc2 -> Rsrc2_low*.cnt
SHP FileSys -> FactoryFs_Z500_*.bin
EFS -> NEVER USE THIS FILE IF EXISTS IN YOURS. IT WILL DELETE YOUR IMEI AND YOU CAN'T CONNECT WITH PCSTUDIO.
* depends on the firmware file.
Connect the phone to the computer via USB.
Now click download, and accept the warning. The flash procedure should start and will take 10-15 minutes.