先拆机,在用SMART盒写BOOT文件
Disassemble the phone.
Connect your phone with USB cable to PC via Smart-Clip.
Connect testpoint as it show on a picture.
Connect fully charged phone battery.
Launch SmartMoto, select "Smart-Clip USB port" in connection window and press "Search", "S Blank Neptune LTE" should be detected.
Disconnect testpoint.
Flash it with V3_boot_7.E.0.smf file.
Turn the headset on. If the phone does not turn on then flash it with R374_G_0E.40.9CR_lpXXX_full_flash.smf file (Without testpoint, "Overwrite boot area" option must be checked).
Turn the handset on and unlock it with Smart-Clip, simply by pressing UNLOCK button.
Disassemble the phone.
Connect your phone with USB cable to PC via Smart-Clip.
Connect testpoint as it show on a picture.
Connect fully charged phone battery.
Launch SmartMoto, select "Smart-Clip USB port" in connection window and press "Search", "S Blank Neptune LTE" should be detected.
Disconnect testpoint.
Flash it with V3_boot_7.E.0.smf file.
Turn the headset on. If the phone does not turn on then flash it with R374_G_0E.40.9CR_lpXXX_full_flash.smf file (Without testpoint, "Overwrite boot area" option must be checked).
Turn the handset on and unlock it with Smart-Clip, simply by pressing UNLOCK button.
