DB2020 phones are K610, K790, K800, V630,
W710, W850, Z610, Z710 and upcoming models.
Cruiser logs
guide:
1. Reading Card ID
具体步骤：
Reading CardID
1. Be sure you have latest version of Cruiser installed
2. Start Cruiser and open Settings
3. Click on "Licensing" tab and then on "Read card ID".
2. Entering password
具体步骤：
1. Be sure you have latest version of Cruiser installed
2. Start Cruiser and open Settings
3. Click on "Server" tab, choose "CruiserLog server 1 (via IP
address)" and enter password in "Client password"
4. Start Communication window, go to Extras and click on "Get
Credit Info" button.
5. If you will see your balance all is OK.
If you get error
"Client/server mismatch detected" or "Unable to connect to server"
go to
Settings -> Server -> check Alternate way, restart Cruiser and try again
Step 4.
3. Flashing phone, disabling Camera sound and
Total Call Timer reset
(all three operations take together only 1 log)
具体步骤：
1. Be sure you have latest version of Cruiser installed
2. In Primary tab -> Attach phone
3. In Flash tab -> Flash ARM flash file
4. Flash FS flash file
5. Select proper language pack and firmware version of flash file
from Step 4
6. Click on Customize FS
7. Go to "File System" tab -> click on "Camera sound on/off"
(this step is optional)
8. Go to "GDFS" tab, select "Reset total call time" and click on
"Modify GDFS" (this step is optional)
You can use also other
options by same way (Reset flip counter, Reset joystick counter, Enable GSM/3G
selection menu etc.)
9. In "File system" tab click on "Shutdown FS" or press Ctrl +
O
4. Resetting user code
具体步骤：
Resetting user code
1. Be sure you have latest version of Cruiser installed
2. In Primary tab -> Attach phone
3. Go to "Locks" tab and click on "Clear phonelock"
3. In "File system" tab click on "Shutdown FS" or press Ctrl +
O
W710, W850, Z610, Z710 and upcoming models.
Cruiser logs
guide:
1. Reading Card ID
具体步骤：
Reading CardID
1. Be sure you have latest version of Cruiser installed
2. Start Cruiser and open Settings
3. Click on "Licensing" tab and then on "Read card ID".
2. Entering password
具体步骤：
1. Be sure you have latest version of Cruiser installed
2. Start Cruiser and open Settings
3. Click on "Server" tab, choose "CruiserLog server 1 (via IP
address)" and enter password in "Client password"
4. Start Communication window, go to Extras and click on "Get
Credit Info" button.
5. If you will see your balance all is OK.
If you get error
"Client/server mismatch detected" or "Unable to connect to server"
go to
Settings -> Server -> check Alternate way, restart Cruiser and try again
Step 4.
3. Flashing phone, disabling Camera sound and
Total Call Timer reset
(all three operations take together only 1 log)
具体步骤：
1. Be sure you have latest version of Cruiser installed
2. In Primary tab -> Attach phone
3. In Flash tab -> Flash ARM flash file
4. Flash FS flash file
5. Select proper language pack and firmware version of flash file
from Step 4
6. Click on Customize FS
7. Go to "File System" tab -> click on "Camera sound on/off"
(this step is optional)
8. Go to "GDFS" tab, select "Reset total call time" and click on
"Modify GDFS" (this step is optional)
You can use also other
options by same way (Reset flip counter, Reset joystick counter, Enable GSM/3G
selection menu etc.)
9. In "File system" tab click on "Shutdown FS" or press Ctrl +
O
4. Resetting user code
具体步骤：
Resetting user code
1. Be sure you have latest version of Cruiser installed
2. In Primary tab -> Attach phone
3. Go to "Locks" tab and click on "Clear phonelock"
3. In "File system" tab click on "Shutdown FS" or press Ctrl +
O