Phoenix Service Software Version 2007.4.6.170
- 主题发起人 yifenqian
- 开始时间
New Multi Protocol Phoenix Service Software Version 2007.4.6.170
--------------------------------------------------------------------------------
Multi Protocol Phoenix Service Software Version 2007.4.6.170
Multi protocol (including support for CDMA, GSM, TDMA and WCDMA)
Phoenix Service Software version 2007.4.6.170 has been released.
If you have Phoenix version 2004.24.7.55 or older you must uninstall it
before installing this release.
This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2007.4.6.170
- DK2 Dongle Driver v 6.21.0.169
- Connectivity Cable Driver 6.82.5.0
- FLS-4S Dongle Driver v 2.09.06
- Flash Update files for FLS-4S, FPS-8* and FPS-10 v 07.04.013
- Software package for FPS-11 v 1.00.012.1
Recommended PC HW requirements:
- Computer Processor: Pentium 700 MHz or higher
- RAM 256 MB
- Needed disk space 100-200 MB
Supported Operating Systems:
- Windows 2000 Service Pack 3 or higher
- Windows XP Service Pack 1 or higher
During installation a DESKey software protection dongle must be attached.
There are two types of dongle – the parallel port connection and USB
connection. When installing Phoenix into Win2000 or XP you must have
admin rights locally.
For using the Phoenix in Win2000 or XP, user must have power user rights.
After installing Phoenix Service Software version 2007.4.6.170, please
install latest product specific data package or SW bundles; do not use
old data packages or SW bundles.
Supported phone models:
The list of supported models is available once Phoenix is installed by
navigating to the Open Product under the File menu.
Changes/improvements made to from v 2006.44.6.163 to v 2007.4.6.170:
For CDMA:
- Update your FPS-8 or FPS-10’s firmware.
- Energy management calibration fix for various products.
- Added FLS-5 support for the following models: 3155i, 6235, 6265i, 6256i,
6165, 2855i, 2865i, 2355, 2255.
- Preferred connection to FPS-10 is using the LAN port.
- The preferred connection to FLS-4S is using the USB port.
Known limitations/errors:
- FLS-5 is not yet supported for all CDMA phones.
- FPS-11 has limited success with this Phoenix version.
- FPS-11 should be used to revive “dead” Phones.
- Phoenix does not restore the Theme/Background for 3155i, 3155, 3152,
6155, 6155i, and 6152 after Easy Flash
Changes/improvements made to from v2006.44.6.163 to v 2007.4.6.170:
For GSM / WCDMA:
- Update your FPS-8 or FPS-10’s firmware.
- Upgraded FLS drivers to improve FLS-5 flashing success rate.
- Fixed the installation bugs.
- Fault-Log UI has been removed.
- Auto creation of phone data XML-file is an alternative of the fault-log
module, and the path for saving the XML files can be modified with the
new UI under Tools>Options>Phone Info XML files setting menu.
- The “Firmware Update” panel has been improved to show the MCU flash
version to be flashed in the phone.
- Added support for RM-206, RM-230, 2G -RM-302, RM-298, RM-299, RM-
260, RM-270, RM-289, HF-21, RA-6, RH-99, RH-100, RM-277, RM-258,
RM-259, RH-305, RH-306, RM-92, RM-293 and RM-122.
- Energy management calibration fix for various products.
- Error with some functions in Phoenix is grey-out after certificate restoration
for BB-5 phones is fixed.
- Rebuilding IMEI/ESN, SIM lock requires Smart card, SX-4 with rebuild
access rights enabled. Please send your SX-4's serial number to your
regional security officer if you need these rights.
- Rebuilding ESN/IMEI with FPS-8 now requires and SX-4 card to be used.
An external smart card reader is needed when using the FPS-8.
- Auto Tuning requires a user registered and activated SX-4 card.
Known limitations/errors:
- Some BB-5 phones may not be able to flash when using FLS-5 and FBUS
connection, if that’s the case use a USB connection.
--------------------------------------------------------------------------------
Multi Protocol Phoenix Service Software Version 2007.4.6.170
Multi protocol (including support for CDMA, GSM, TDMA and WCDMA)
Phoenix Service Software version 2007.4.6.170 has been released.
If you have Phoenix version 2004.24.7.55 or older you must uninstall it
before installing this release.
This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2007.4.6.170
- DK2 Dongle Driver v 6.21.0.169
- Connectivity Cable Driver 6.82.5.0
- FLS-4S Dongle Driver v 2.09.06
- Flash Update files for FLS-4S, FPS-8* and FPS-10 v 07.04.013
- Software package for FPS-11 v 1.00.012.1
Recommended PC HW requirements:
- Computer Processor: Pentium 700 MHz or higher
- RAM 256 MB
- Needed disk space 100-200 MB
Supported Operating Systems:
- Windows 2000 Service Pack 3 or higher
- Windows XP Service Pack 1 or higher
During installation a DESKey software protection dongle must be attached.
There are two types of dongle – the parallel port connection and USB
connection. When installing Phoenix into Win2000 or XP you must have
admin rights locally.
For using the Phoenix in Win2000 or XP, user must have power user rights.
After installing Phoenix Service Software version 2007.4.6.170, please
install latest product specific data package or SW bundles; do not use
old data packages or SW bundles.
Supported phone models:
The list of supported models is available once Phoenix is installed by
navigating to the Open Product under the File menu.
Changes/improvements made to from v 2006.44.6.163 to v 2007.4.6.170:
For CDMA:
- Update your FPS-8 or FPS-10’s firmware.
- Energy management calibration fix for various products.
- Added FLS-5 support for the following models: 3155i, 6235, 6265i, 6256i,
6165, 2855i, 2865i, 2355, 2255.
- Preferred connection to FPS-10 is using the LAN port.
- The preferred connection to FLS-4S is using the USB port.
Known limitations/errors:
- FLS-5 is not yet supported for all CDMA phones.
- FPS-11 has limited success with this Phoenix version.
- FPS-11 should be used to revive “dead” Phones.
- Phoenix does not restore the Theme/Background for 3155i, 3155, 3152,
6155, 6155i, and 6152 after Easy Flash
Changes/improvements made to from v2006.44.6.163 to v 2007.4.6.170:
For GSM / WCDMA:
- Update your FPS-8 or FPS-10’s firmware.
- Upgraded FLS drivers to improve FLS-5 flashing success rate.
- Fixed the installation bugs.
- Fault-Log UI has been removed.
- Auto creation of phone data XML-file is an alternative of the fault-log
module, and the path for saving the XML files can be modified with the
new UI under Tools>Options>Phone Info XML files setting menu.
- The “Firmware Update” panel has been improved to show the MCU flash
version to be flashed in the phone.
- Added support for RM-206, RM-230, 2G -RM-302, RM-298, RM-299, RM-
260, RM-270, RM-289, HF-21, RA-6, RH-99, RH-100, RM-277, RM-258,
RM-259, RH-305, RH-306, RM-92, RM-293 and RM-122.
- Energy management calibration fix for various products.
- Error with some functions in Phoenix is grey-out after certificate restoration
for BB-5 phones is fixed.
- Rebuilding IMEI/ESN, SIM lock requires Smart card, SX-4 with rebuild
access rights enabled. Please send your SX-4's serial number to your
regional security officer if you need these rights.
- Rebuilding ESN/IMEI with FPS-8 now requires and SX-4 card to be used.
An external smart card reader is needed when using the FPS-8.
- Auto Tuning requires a user registered and activated SX-4 card.
Known limitations/errors:
- Some BB-5 phones may not be able to flash when using FLS-5 and FBUS
connection, if that’s the case use a USB connection.