[font=楷体_GB2312]第一种方法:You can also try this:
1. make sure the battery is 100% charged, insert it to the phone
2. do not physically connect the cable to the K310i yet
3. start Cruiser, after the ready message, click "Attach to Phone"
4. wait for the power up message, THEN attach the cable to the phone
Hopefully you should see the initialisation message.
第二种方法:use setool3 works fine to unlock K310i
1:设置第一个和第三个钩钩上.
2:点FLASH
3 ;OK[/font][p:1]
1. make sure the battery is 100% charged, insert it to the phone
2. do not physically connect the cable to the K310i yet
3. start Cruiser, after the ready message, click "Attach to Phone"
4. wait for the power up message, THEN attach the cable to the phone
Hopefully you should see the initialisation message.
第二种方法:use setool3 works fine to unlock K310i
1:设置第一个和第三个钩钩上.
2:点FLASH
3 ;OK[/font][p:1]