刷死p1的朋友不用怕~前几天接了客户一台P1I英文改中文~用XS++3.2改了CDA用US在线升中文~在更新到98%显示更新失败，现在无法开机，想重新更新时，显示无法识别。
用XS++连接上显示
00:30:12| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
00:30:12| 载入 PRODUCTION_ID loader
00:30:12| 激活 GDFS...
00:30:12| 无法打开 GDFS
00:30:12| 激活 GDFS...I
00:30:12| 无法打开 GDFS
00:30:12| 激活 GDFS...
00:30:12| 无法打开 GDFS
00:30:12| 警告: IMEI名称无法与GDFS名称匹配 (IMEI1 GDFS:n/a)
00:30:12| ...使用 IMEI 名称
00:30:12|
00:30:12| 分析 EPOC 智能机...
00:30:12|平台: DB2001
00:30:12| OTP CID: 52
00:30:12| EROM CID: 53
00:30:12| EROM 颜色: Red
00:30:12| IMEI: 35703301xxxxxx
00:30:12| 手机型号: P1
00:30:12| 零件号码: n/a
00:30:12| 智能机版本: R1C01
00:30:12| 手机软件版本:
00:30:12| 处理单元:
00:30:12| 组织者:
00:30:12| CDA:
00:30:12| 激活 GDFS...
00:30:12| 无法打开 GDFS
00:30:12| 准备就绪!
无法还原GDFS~我一看心想坏了~在网上找了都没这机的刷死的例子~心里大叫不妙~
后来我用Setool最新版 v0.914020刷好了
1。注意P1是用本身机器自带的数据线来刷机的，不是setool的刷机线！
第一步：数据线连接电脑，然后按住手机C键连接手机，电脑会提示你安装驱动，驱动程序的位置在\drivers\HermioneDrivers 这个地方！然后电脑会正确安装驱动，在电脑的硬件管理器的地方会看到，说明你已经成功安装了。
第二步：确定手机的系统，点Identify
注意：现在索爱的安全系统有两种，即新 ，旧之分。
如果单纯只是刷机，新，旧系统都一样，都不需要用点数，如果要改CDA，那么旧的可以免费改，新的需要点数！
第三步：从setool官方下载刷机包，（注意：下载下来的是zip文件，不用解压，直接添加这个zip文件到刷机文件的位置就可以）
第四步：如果不想改CDA，就不要选择Process PDA update files！
浏览附件1.jpg
第五步：点Flash，等待，刷机成功！
浏览附件2.jpg
哈哈~~~P1又活了
0.914020/UNI
CARD SERIAL: 00028092
Loaded 51 flash descriptors
writing C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
Processing package
C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
please select any COM port as interface
smartphone setup failed
Break.
Elapsed:0 secs.
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
please select any COM port as interface
smartphone setup failed
Elapsed:0 secs.
writing C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
Processing package
C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
detected MASTER on COM3, SLAVE on COM4
PDA EROM VERSION: CXC162122 R1C01
Processing ISP files
ISP SOFTWARE VERSION: 2.38
Flashing:
2_35_CXC162176_isp_EN_MO_Camera_Firmware.ispsoftware
Processing ACPU files
PROCESSING: Core OS
FILE FLASHED OK
PROCESSING: ROFS1
FILE FLASHED OK
PROCESSING: ROFS1 Extension
FILE FLASHED OK
PROCESSING: ROFS2
FILE FLASHED OK
PROCESSING: USERDATA
FILE FLASHED OK
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM3, SLAVE on COM4
Open COM port OK
ChipID:7100,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:52 PAF:1 IMEI:35703301412878 CERT:RED
LDR:060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
Flash ID check:8964
Flash props sent ok
Processing CCPU files
Flashing:
R2A03_CXC162175_CCPU_fs_EN_MO_Red_CID53_DB2001.software
CURRENT FLASH FILE CID:53
SSW uses complete hash, hash len is:160
Will flash 8 blocks...
SSW loading returns:0
Flashing:
R9G007_CXC162037_CCPU_EN_MO_Red_CID53_DB2001.software
CURRENT FLASH FILE CID:53
SSW uses complete hash, hash len is:2140
Will flash 107 blocks...
SSW loading returns:0
Processing update files
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM3, SLAVE on COM4
Open COM port OK
ChipID:7100,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:52 PAF:1 IMEI:35703301412878 CERT:RED
NEW SECURITY NOT SUPPORTED IN STANDALONE MODE.
Break.
Elapsed:825 secs.
用XS++连接上显示
00:30:12| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
00:30:12| 载入 PRODUCTION_ID loader
00:30:12| 激活 GDFS...
00:30:12| 无法打开 GDFS
00:30:12| 激活 GDFS...I
00:30:12| 无法打开 GDFS
00:30:12| 激活 GDFS...
00:30:12| 无法打开 GDFS
00:30:12| 警告: IMEI名称无法与GDFS名称匹配 (IMEI1 GDFS:n/a)
00:30:12| ...使用 IMEI 名称
00:30:12|
00:30:12| 分析 EPOC 智能机...
00:30:12|平台: DB2001
00:30:12| OTP CID: 52
00:30:12| EROM CID: 53
00:30:12| EROM 颜色: Red
00:30:12| IMEI: 35703301xxxxxx
00:30:12| 手机型号: P1
00:30:12| 零件号码: n/a
00:30:12| 智能机版本: R1C01
00:30:12| 手机软件版本:
00:30:12| 处理单元:
00:30:12| 组织者:
00:30:12| CDA:
00:30:12| 激活 GDFS...
00:30:12| 无法打开 GDFS
00:30:12| 准备就绪!
无法还原GDFS~我一看心想坏了~在网上找了都没这机的刷死的例子~心里大叫不妙~
后来我用Setool最新版 v0.914020刷好了
1。注意P1是用本身机器自带的数据线来刷机的，不是setool的刷机线！
第一步：数据线连接电脑，然后按住手机C键连接手机，电脑会提示你安装驱动，驱动程序的位置在\drivers\HermioneDrivers 这个地方！然后电脑会正确安装驱动，在电脑的硬件管理器的地方会看到，说明你已经成功安装了。
第二步：确定手机的系统，点Identify
注意：现在索爱的安全系统有两种，即新 ，旧之分。
如果单纯只是刷机，新，旧系统都一样，都不需要用点数，如果要改CDA，那么旧的可以免费改，新的需要点数！
第三步：从setool官方下载刷机包，（注意：下载下来的是zip文件，不用解压，直接添加这个zip文件到刷机文件的位置就可以）
第四步：如果不想改CDA，就不要选择Process PDA update files！
浏览附件1.jpg
第五步：点Flash，等待，刷机成功！
浏览附件2.jpg
哈哈~~~P1又活了
0.914020/UNI
CARD SERIAL: 00028092
Loaded 51 flash descriptors
writing C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
Processing package
C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
please select any COM port as interface
smartphone setup failed
Break.
Elapsed:0 secs.
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
please select any COM port as interface
smartphone setup failed
Elapsed:0 secs.
writing C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
Processing package
C:\Documents and Settings\Administrator\桌面\P1i_Trade_APAC.zip
detected MASTER on COM3, SLAVE on COM4
PDA EROM VERSION: CXC162122 R1C01
Processing ISP files
ISP SOFTWARE VERSION: 2.38
Flashing:
2_35_CXC162176_isp_EN_MO_Camera_Firmware.ispsoftware
Processing ACPU files
PROCESSING: Core OS
FILE FLASHED OK
PROCESSING: ROFS1
FILE FLASHED OK
PROCESSING: ROFS1 Extension
FILE FLASHED OK
PROCESSING: ROFS2
FILE FLASHED OK
PROCESSING: USERDATA
FILE FLASHED OK
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM3, SLAVE on COM4
Open COM port OK
ChipID:7100,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:52 PAF:1 IMEI:35703301412878 CERT:RED
LDR:060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
Flash ID check:8964
Flash props sent ok
Processing CCPU files
Flashing:
R2A03_CXC162175_CCPU_fs_EN_MO_Red_CID53_DB2001.software
CURRENT FLASH FILE CID:53
SSW uses complete hash, hash len is:160
Will flash 8 blocks...
SSW loading returns:0
Flashing:
R9G007_CXC162037_CCPU_EN_MO_Red_CID53_DB2001.software
CURRENT FLASH FILE CID:53
SSW uses complete hash, hash len is:2140
Will flash 107 blocks...
SSW loading returns:0
Processing update files
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM3, SLAVE on COM4
Open COM port OK
ChipID:7100,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:52 PAF:1 IMEI:35703301412878 CERT:RED
NEW SECURITY NOT SUPPORTED IN STANDALONE MODE.
Break.
Elapsed:825 secs.