w810写空板又出错，请看一下

[longsoft]

这是什么问题呀？？？？？

v0.914028/UNI
CARD SERIAL: 00070132
Loaded 51 flash descriptors
RECOVERY MODE STARTED
Open COM port OK
REC:070307 0947 NPA4_CXC1326739_DB2010_SEMC_RECOVERY_P2A
Recovery succefull. Reflash phone now
Elapsed: 5 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
OTP LOCKED:0 CID:15 PAF:1 IMEI:04857555048575 CERT:BROWN
LDRB2010_R1A002_PRODLOADER_PATCHED_SETOOL2
Flash ID check:2019
Flash props sent ok
writing D:\setool3\v0.914028\gdfs_in_ssw_format\w810_gdfs_in_ssw_format.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:32
Will flash 32 blocks...
SSW loading returns:0
writing D:\setool3\v0.914028\eroms\w810_erom_red49.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:4
Will flash 4 blocks...
SSW loading returns:0
Setting up GDFS...
OTP WRITE NOT EXECUTED.
gdfsWrite no ACK
Can't write critical data
final preparation fail. see messages above.
Elapsed: 138 secs.

 

[deelrm]

[s:107] [s:106] 没见过
[s:119]

 

[zxnk1688]

[s:105] [s:105] [s:105]

 

[hzgettop]

字库质量不好或者字库没装好!也可能原来就不是字库问题!

 

[qq2247691]

[s:105] [s:105] [s:105]

 

[刘世猛]

可能需要清空字库，在刷50的资料……试试

 

[刘世猛]

在不行就试试这个：
1. flash EROM
2. flash FOTA
3. flash main firmware
IMEI - lead told me that will be implemented
try it yourself