我按照教程刷U608ZCGL1a版本，到最后的时候报错：（见图），不知道是何原因，试了几次都这样，请教高手解决。
浏览附件989120
这是LOGO记录：
I E1 16:41:40 OptiFlash 4.16 T1 started
I E2 16:41:48 ThreadGUI started
I E3 16:41:48 ThreadProtocol started
I E4 16:41:48 OS: NT family, Ver:5.1
I E5 16:41:48 Boot loader protocol type: passive
I E6 16:41:48 Memory interface type: 1
I E7 16:41:48 Setup loader: -
I E8 16:41:48 Flash loader: F:\Downloads\SandBox\360SEBox\Downloads\U600_Optiflash\fl_sceptrehp_sgh_hw1_usb_s07_m01.sre
I E9 16:41:48 Flash loader base addr: 0x30080000
I E10 16:41:48 Stack base addr: 0x20000000
I E11 16:41:48 Stack buffers: 2
I E12 16:41:48 0: 0x20000000 - 0x21ffffff [32 MB (33554432 Bytes)]
I E13 16:41:48 1: 0x28000000 - 0x2fffffff [128 MB (134217728 Bytes)]
I E14 16:41:48 Opened COM7 at 115200 baud
I E15 16:41:48 PC transfer speeds (COM7): 57600 115200 230400 460800 921600
I E16 16:41:48 Loading S-record file (RangeCheck=Off)
I E17 16:41:48 File: F:\Downloads\SandBox\360SEBox\Downloads\U600_Optiflash\fl_sceptrehp_sgh_hw1_usb_s07_m01.sre
I E18 16:41:48 SRE line 33627: IGNORING: S70530080000C2
I E19 16:41:48 There is 1 memory region in the S-record file:
I E20 16:41:48 1: 0x30080000 - 0x30103597 = 538008 Bytes
I E21 16:41:48 Loading S-record file (RangeCheck=On)
I E22 16:41:48 File: F:\三星\U608\U608ZCGL1a\U608ZCGL1a.s3
I E23 16:41:49 SRE line 1: IGNORING: S00600004844521B
I E24 16:41:58 SRE line 3396026: IGNORING: S70520000000DA
I E25 16:41:58 There are 9 memory regions in the S-record file:
I E26 16:41:58 1: 0x20000000 - 0x20000007 = 8 Bytes
I E27 16:41:58 2: 0x20010000 - 0x200147c3 = 18372 Bytes
I E28 16:41:58 3: 0x20020000 - 0x2002dd93 = 56724 Bytes
I E29 16:41:58 4: 0x20040000 - 0x200404e3 = 1252 Bytes
I E30 16:41:58 5: 0x20042000 - 0x201948c7 = 1386696 Bytes
I E31 16:41:58 6: 0x201b0000 - 0x21a4ae03 = 25800196 Bytes
I E32 16:41:58 7: 0x21bb0000 - 0x21eec3e3 = 3392484 Bytes
I E33 16:41:58 8: 0x21f10000 - 0x21f15f2c = 24365 Bytes
I E34 16:41:58 9: 0x28000000 - 0x2968f703 = 23656196 Bytes
I E35 16:41:58 SendFile=F:\Downloads\SandBox\360SEBox\Downloads\U600_Optiflash\fl_sceptrehp_sgh_hw1_usb_s07_m01.sre, Mode=3
I E36 16:41:58 Power on mobile !
I E37 16:41:58 TalkToBootLoader (using COM7)
I E38 16:41:58 Talking to passive bootloader
I E39 16:41:58 Failed to send PC_PING
I E40 16:41:58 SendFile: 5 (ERR_PROTOCOL)
I E41 16:41:58 Closed COM7
I E42 16:41:58 ReLoad: 5 (ERR_PROTOCOL)
I E43 16:41:58 Error code: ERR_PROTOCOL
E E44 16:41:58 Sorry, an error has occured ! (ERR_PROTOCOL)
I E45 16:41:58 ThreadProtocol finished
I E46 16:41:58 ThreadProtocol: 5
I E47 16:41:58 ThreadGUI finished
浏览附件989120
这是LOGO记录：
I E1 16:41:40 OptiFlash 4.16 T1 started
I E2 16:41:48 ThreadGUI started
I E3 16:41:48 ThreadProtocol started
I E4 16:41:48 OS: NT family, Ver:5.1
I E5 16:41:48 Boot loader protocol type: passive
I E6 16:41:48 Memory interface type: 1
I E7 16:41:48 Setup loader: -
I E8 16:41:48 Flash loader: F:\Downloads\SandBox\360SEBox\Downloads\U600_Optiflash\fl_sceptrehp_sgh_hw1_usb_s07_m01.sre
I E9 16:41:48 Flash loader base addr: 0x30080000
I E10 16:41:48 Stack base addr: 0x20000000
I E11 16:41:48 Stack buffers: 2
I E12 16:41:48 0: 0x20000000 - 0x21ffffff [32 MB (33554432 Bytes)]
I E13 16:41:48 1: 0x28000000 - 0x2fffffff [128 MB (134217728 Bytes)]
I E14 16:41:48 Opened COM7 at 115200 baud
I E15 16:41:48 PC transfer speeds (COM7): 57600 115200 230400 460800 921600
I E16 16:41:48 Loading S-record file (RangeCheck=Off)
I E17 16:41:48 File: F:\Downloads\SandBox\360SEBox\Downloads\U600_Optiflash\fl_sceptrehp_sgh_hw1_usb_s07_m01.sre
I E18 16:41:48 SRE line 33627: IGNORING: S70530080000C2
I E19 16:41:48 There is 1 memory region in the S-record file:
I E20 16:41:48 1: 0x30080000 - 0x30103597 = 538008 Bytes
I E21 16:41:48 Loading S-record file (RangeCheck=On)
I E22 16:41:48 File: F:\三星\U608\U608ZCGL1a\U608ZCGL1a.s3
I E23 16:41:49 SRE line 1: IGNORING: S00600004844521B
I E24 16:41:58 SRE line 3396026: IGNORING: S70520000000DA
I E25 16:41:58 There are 9 memory regions in the S-record file:
I E26 16:41:58 1: 0x20000000 - 0x20000007 = 8 Bytes
I E27 16:41:58 2: 0x20010000 - 0x200147c3 = 18372 Bytes
I E28 16:41:58 3: 0x20020000 - 0x2002dd93 = 56724 Bytes
I E29 16:41:58 4: 0x20040000 - 0x200404e3 = 1252 Bytes
I E30 16:41:58 5: 0x20042000 - 0x201948c7 = 1386696 Bytes
I E31 16:41:58 6: 0x201b0000 - 0x21a4ae03 = 25800196 Bytes
I E32 16:41:58 7: 0x21bb0000 - 0x21eec3e3 = 3392484 Bytes
I E33 16:41:58 8: 0x21f10000 - 0x21f15f2c = 24365 Bytes
I E34 16:41:58 9: 0x28000000 - 0x2968f703 = 23656196 Bytes
I E35 16:41:58 SendFile=F:\Downloads\SandBox\360SEBox\Downloads\U600_Optiflash\fl_sceptrehp_sgh_hw1_usb_s07_m01.sre, Mode=3
I E36 16:41:58 Power on mobile !
I E37 16:41:58 TalkToBootLoader (using COM7)
I E38 16:41:58 Talking to passive bootloader
I E39 16:41:58 Failed to send PC_PING
I E40 16:41:58 SendFile: 5 (ERR_PROTOCOL)
I E41 16:41:58 Closed COM7
I E42 16:41:58 ReLoad: 5 (ERR_PROTOCOL)
I E43 16:41:58 Error code: ERR_PROTOCOL
E E44 16:41:58 Sorry, an error has occured ! (ERR_PROTOCOL)
I E45 16:41:58 ThreadProtocol finished
I E46 16:41:58 ThreadProtocol: 5
I E47 16:41:58 ThreadGUI finished