I E1 20:52:19 OptiFlash 4.16 T1 started
I E2 20:55:29 PC transfer speeds (COM6): 57600 115200 230400 460800 921600
I E3 20:55:29 Loading S-record file (RangeCheck=Off)
I E4 20:55:29 File: D:\桌面\sji\X830\OptiFlash_X830N\fl_sceptrehp_sgh_hw1_usb_s06_m02_3.sre
I E5 20:55:29 SRE line 31780: IGNORING: S70530080000C2
I E6 20:55:29 There is 1 memory region in the S-record file:
I E7 20:55:29 1: 0x30080000 - 0x300fc223 = 508452 Bytes
I E8 20:55:29 Loading S-record file (RangeCheck=On)
I E9 20:55:29 File: D:\桌面\sji\X830\X838ZCFK3_s3\X838ZCFK3_s3.s3
I E10 20:55:30 SRE line 3546: IGNORING: S70520020000D8
I E11 20:55:30 SRE line 3547: IGNORING: S00600004844521B
I E12 20:55:30 SRE line 224012: IGNORING: S705A002000058
I E13 20:55:30 SRE line 224013: IGNORING: S020000070616870655F726668656C696F73325F7432366D755F783833302E733381
I E14 20:55:30 SRE line 225115: IGNORING: S70520010000D9
I E15 20:55:30 SRE line 225200: IGNORING: S70520040000D6
I E16 20:55:35 SRE line 2258252: IGNORING: S705206000007A
I E17 20:55:35 There are 5 memory regions in the S-record file:
I E18 20:55:35 1: 0x20010000 - 0x200144cb = 17612 Bytes
I E19 20:55:35 2: 0x20020000 - 0x2002dd8f = 56720 Bytes
I E20 20:55:35 3: 0x20040000 - 0x2004053f = 1344 Bytes
I E21 20:55:35 4: 0x20042000 - 0x2039f2ff = 3527424 Bytes
I E22 20:55:35 5: 0x20600000 - 0x225059a3 = 32528804 Bytes
I E23 20:55:35 Power on mobile !
I E24 20:55:41 Flash loader version: V5.13
I E25 20:55:41 Mobile transfer speeds: 57600, 115200, 230400, 460800, 921600,
I E26 20:55:41 IDs returned by detection: 1
I E27 20:55:41 AMD:0x01/0x227e3d00, Intel:0xff/0xffff0000, NAND:0x00/0x00000000(image size=0)
I E28 20:55:41 Detected flash chips: 1
I E29 20:55:41 0x01/0x227e3d00: AMD TEST2, 512Mbit (64 MB (67108864 Bytes) in 518 sectors)
I E30 20:55:41 COM6: changing baud rate to 921600
I E31 20:55:42 Port info:
I E32 20:55:42 Logical port 0: COM6 <-> UART0 at 921600 baud (~100%)
I E33 20:55:42 There is 1 reserved region defined:
I E34 20:55:42 1: 0x23fe0000 - 0x23ffffff = 131072 Bytes
I E35 20:55:42 'Erase unused memory' option is ENABLED !
I E36 20:55:42 1 memory region has to be flashed:
I E37 20:55:42 1: 0x20000000 - 0x23fdffff = 66977792 Bytes
I E38 20:55:42 Data to be transferred: 63 MB (66977792 Bytes)
I E39 21:07:42 All is well !
（已上刷的是X838ZCFK3_s3，刷完后定版在2008。。。那里）
（已下刷的是X830NXXFK1.s3 ，刷完后恢复正常 就是英文的不爽）
I E40 21:09:58 PC transfer speeds (COM6): 57600 115200 230400 460800 921600
I E41 21:09:58 Loading S-record file (RangeCheck=Off)
I E42 21:09:58 File: D:\桌面\sji\X830\OptiFlash_X830N\fl_sceptrehp_sgh_hw1_usb_s06_m02_3.sre
I E43 21:09:58 SRE line 31780: IGNORING: S70530080000C2
I E44 21:09:58 There is 1 memory region in the S-record file:
I E45 21:09:58 1: 0x30080000 - 0x300fc223 = 508452 Bytes
I E46 21:09:58 Loading S-record file (RangeCheck=On)
I E47 21:09:58 File: D:\桌面\sji\X830\英文\X830NXXFK1.s3
I E48 21:09:58 SRE line 3546: IGNORING: S70520020000D8
I E49 21:09:59 SRE line 3547: IGNORING: S00600004844521B
I E50 21:09:59 SRE line 184628: IGNORING: S705A002000058
I E51 21:09:59 SRE line 184629: IGNORING: S020000070616870655F726668656C696F73325F7432366D755F783833302E733381
I E52 21:09:59 SRE line 185731: IGNORING: S70520010000D9
I E53 21:09:59 SRE line 185814: IGNORING: S70520040000D6
I E54 21:10:03 SRE line 2092666: IGNORING: S705206000007A
I E55 21:10:03 There are 5 memory regions in the S-record file:
I E56 21:10:03 1: 0x20010000 - 0x200144cb = 17612 Bytes
I E57 21:10:03 2: 0x20020000 - 0x2002dd8f = 56720 Bytes
I E58 21:10:03 3: 0x20040000 - 0x20040513 = 1300 Bytes
I E59 21:10:03 4: 0x20042000 - 0x2030557f = 2897280 Bytes
I E60 21:10:03 5: 0x20600000 - 0x22318a27 = 30509608 Bytes
I E61 21:10:03 Power on mobile !
I E62 21:10:09 Flash loader version: V5.13
I E63 21:10:09 Mobile transfer speeds: 57600, 115200, 230400, 460800, 921600,
I E64 21:10:09 IDs returned by detection: 1
I E65 21:10:09 AMD:0x01/0x227e3d00, Intel:0xff/0xffff0000, NAND:0x00/0x00000000(image size=0)
I E66 21:10:09 Detected flash chips: 1
I E67 21:10:09 0x01/0x227e3d00: AMD TEST2, 512Mbit (64 MB (67108864 Bytes) in 518 sectors)
I E68 21:10:09 COM6: changing baud rate to 921600
I E69 21:10:10 Port info:
I E70 21:10:10 Logical port 0: COM6 <-> UART0 at 921600 baud (~100%)
I E71 21:10:10 There is 1 reserved region defined:
I E72 21:10:10 1: 0x23fe0000 - 0x23ffffff = 131072 Bytes
I E73 21:10:10 'Erase unused memory' option is ENABLED !
I E74 21:10:10 1 memory region has to be flashed:
I E75 21:10:10 1: 0x20000000 - 0x23fdffff = 66977792 Bytes
I E76 21:10:10 Data to be transferred: 63 MB (66977792 Bytes)
I E77 21:22:03 All is well !
I E2 20:55:29 PC transfer speeds (COM6): 57600 115200 230400 460800 921600
I E3 20:55:29 Loading S-record file (RangeCheck=Off)
I E4 20:55:29 File: D:\桌面\sji\X830\OptiFlash_X830N\fl_sceptrehp_sgh_hw1_usb_s06_m02_3.sre
I E5 20:55:29 SRE line 31780: IGNORING: S70530080000C2
I E6 20:55:29 There is 1 memory region in the S-record file:
I E7 20:55:29 1: 0x30080000 - 0x300fc223 = 508452 Bytes
I E8 20:55:29 Loading S-record file (RangeCheck=On)
I E9 20:55:29 File: D:\桌面\sji\X830\X838ZCFK3_s3\X838ZCFK3_s3.s3
I E10 20:55:30 SRE line 3546: IGNORING: S70520020000D8
I E11 20:55:30 SRE line 3547: IGNORING: S00600004844521B
I E12 20:55:30 SRE line 224012: IGNORING: S705A002000058
I E13 20:55:30 SRE line 224013: IGNORING: S020000070616870655F726668656C696F73325F7432366D755F783833302E733381
I E14 20:55:30 SRE line 225115: IGNORING: S70520010000D9
I E15 20:55:30 SRE line 225200: IGNORING: S70520040000D6
I E16 20:55:35 SRE line 2258252: IGNORING: S705206000007A
I E17 20:55:35 There are 5 memory regions in the S-record file:
I E18 20:55:35 1: 0x20010000 - 0x200144cb = 17612 Bytes
I E19 20:55:35 2: 0x20020000 - 0x2002dd8f = 56720 Bytes
I E20 20:55:35 3: 0x20040000 - 0x2004053f = 1344 Bytes
I E21 20:55:35 4: 0x20042000 - 0x2039f2ff = 3527424 Bytes
I E22 20:55:35 5: 0x20600000 - 0x225059a3 = 32528804 Bytes
I E23 20:55:35 Power on mobile !
I E24 20:55:41 Flash loader version: V5.13
I E25 20:55:41 Mobile transfer speeds: 57600, 115200, 230400, 460800, 921600,
I E26 20:55:41 IDs returned by detection: 1
I E27 20:55:41 AMD:0x01/0x227e3d00, Intel:0xff/0xffff0000, NAND:0x00/0x00000000(image size=0)
I E28 20:55:41 Detected flash chips: 1
I E29 20:55:41 0x01/0x227e3d00: AMD TEST2, 512Mbit (64 MB (67108864 Bytes) in 518 sectors)
I E30 20:55:41 COM6: changing baud rate to 921600
I E31 20:55:42 Port info:
I E32 20:55:42 Logical port 0: COM6 <-> UART0 at 921600 baud (~100%)
I E33 20:55:42 There is 1 reserved region defined:
I E34 20:55:42 1: 0x23fe0000 - 0x23ffffff = 131072 Bytes
I E35 20:55:42 'Erase unused memory' option is ENABLED !
I E36 20:55:42 1 memory region has to be flashed:
I E37 20:55:42 1: 0x20000000 - 0x23fdffff = 66977792 Bytes
I E38 20:55:42 Data to be transferred: 63 MB (66977792 Bytes)
I E39 21:07:42 All is well !
（已上刷的是X838ZCFK3_s3，刷完后定版在2008。。。那里）
（已下刷的是X830NXXFK1.s3 ，刷完后恢复正常 就是英文的不爽）
I E40 21:09:58 PC transfer speeds (COM6): 57600 115200 230400 460800 921600
I E41 21:09:58 Loading S-record file (RangeCheck=Off)
I E42 21:09:58 File: D:\桌面\sji\X830\OptiFlash_X830N\fl_sceptrehp_sgh_hw1_usb_s06_m02_3.sre
I E43 21:09:58 SRE line 31780: IGNORING: S70530080000C2
I E44 21:09:58 There is 1 memory region in the S-record file:
I E45 21:09:58 1: 0x30080000 - 0x300fc223 = 508452 Bytes
I E46 21:09:58 Loading S-record file (RangeCheck=On)
I E47 21:09:58 File: D:\桌面\sji\X830\英文\X830NXXFK1.s3
I E48 21:09:58 SRE line 3546: IGNORING: S70520020000D8
I E49 21:09:59 SRE line 3547: IGNORING: S00600004844521B
I E50 21:09:59 SRE line 184628: IGNORING: S705A002000058
I E51 21:09:59 SRE line 184629: IGNORING: S020000070616870655F726668656C696F73325F7432366D755F783833302E733381
I E52 21:09:59 SRE line 185731: IGNORING: S70520010000D9
I E53 21:09:59 SRE line 185814: IGNORING: S70520040000D6
I E54 21:10:03 SRE line 2092666: IGNORING: S705206000007A
I E55 21:10:03 There are 5 memory regions in the S-record file:
I E56 21:10:03 1: 0x20010000 - 0x200144cb = 17612 Bytes
I E57 21:10:03 2: 0x20020000 - 0x2002dd8f = 56720 Bytes
I E58 21:10:03 3: 0x20040000 - 0x20040513 = 1300 Bytes
I E59 21:10:03 4: 0x20042000 - 0x2030557f = 2897280 Bytes
I E60 21:10:03 5: 0x20600000 - 0x22318a27 = 30509608 Bytes
I E61 21:10:03 Power on mobile !
I E62 21:10:09 Flash loader version: V5.13
I E63 21:10:09 Mobile transfer speeds: 57600, 115200, 230400, 460800, 921600,
I E64 21:10:09 IDs returned by detection: 1
I E65 21:10:09 AMD:0x01/0x227e3d00, Intel:0xff/0xffff0000, NAND:0x00/0x00000000(image size=0)
I E66 21:10:09 Detected flash chips: 1
I E67 21:10:09 0x01/0x227e3d00: AMD TEST2, 512Mbit (64 MB (67108864 Bytes) in 518 sectors)
I E68 21:10:09 COM6: changing baud rate to 921600
I E69 21:10:10 Port info:
I E70 21:10:10 Logical port 0: COM6 <-> UART0 at 921600 baud (~100%)
I E71 21:10:10 There is 1 reserved region defined:
I E72 21:10:10 1: 0x23fe0000 - 0x23ffffff = 131072 Bytes
I E73 21:10:10 'Erase unused memory' option is ENABLED !
I E74 21:10:10 1 memory region has to be flashed:
I E75 21:10:10 1: 0x20000000 - 0x23fdffff = 66977792 Bytes
I E76 21:10:10 Data to be transferred: 63 MB (66977792 Bytes)
I E77 21:22:03 All is well !