[font=georgia,times]CruiserSuite TP Full Unlocker v1.00浏览附件tpFull_final.gif [/font]
[font=georgia,times]官方发布声明：
Dear all,
we have just released most wanted SonyEricsson Full Unlocker via TestPoint with Security Zone repair possibility. The CruiserSuite TP Full Unlocker requires UC-20 TestPoint cable - you can buy it from any of our resellers.
All other TestPoint solutions force the phone address bus pins to 3.3V which is exceeding its maximal allowed voltage almost twice. Only the UC-20 TP cable was designed to prevent this and avoid likely flash chip damage.
Here are release notes of CruiserSuite TP Full Unlocker v1.00:
Simple to use & failsafe
Supports all DB2020 plattform based SonyEricsson phones
All current CIDs are suported
This software is for all users who can disassemble the phone - also for inexperienced ones. (For disassembling phones, we recommend to read proper SonyEricsson service manuals.)
TP Full Unlocker does not destroy phone calibration data (so typical for SeTool ... )
For the phone safety, TestPointing requires UC-20 TP cable.
Unlike other amateur solutions which use external battery connection to the TP, our software uses specially designed UC-20 cable which can handle different bus voltages and prevents any potential flash chip damage.
TP is done in two stages. Once you complete TP stage 1 you don't need to repeat it anymore. Phone is then bootable via the 2nd testpoint anytime.
PDF manual is available after installation as usual in Documents folder [/font]
[font=georgia,times]
大意是：
这个是CR推出的迄今市场上最安全的测试点全解和修复gdfs的平台，使用的是CR小组自行研制的UC-20带测试点的刷机线，拥有自动调节电压的功能，能最大程度的保护主版元件！现只支持所有CID的db2020型号！
解锁方法仍然是采用两个测试点的方法，但是有一点好处，就是做完了第一个测试点了以后，以后就不用再重新做了，可以在任何时候直接做第二个测试点来完成解锁或者修复gdfs！
具体的测试点，解锁方法和流程在平台安装的开始菜单下的document里有介绍。[/font]
[font=georgia,times][/font]
[font=georgia,times]新的CR测试点盒子[/font][font=georgia,times]浏览附件cruisersuitebox1.gif 浏览附件cruisersuitebox2.gif [/font]
[font=georgia,times]官方发布声明：
Dear all,
we have just released most wanted SonyEricsson Full Unlocker via TestPoint with Security Zone repair possibility. The CruiserSuite TP Full Unlocker requires UC-20 TestPoint cable - you can buy it from any of our resellers.
All other TestPoint solutions force the phone address bus pins to 3.3V which is exceeding its maximal allowed voltage almost twice. Only the UC-20 TP cable was designed to prevent this and avoid likely flash chip damage.
Here are release notes of CruiserSuite TP Full Unlocker v1.00:
Simple to use & failsafe
Supports all DB2020 plattform based SonyEricsson phones
All current CIDs are suported
This software is for all users who can disassemble the phone - also for inexperienced ones. (For disassembling phones, we recommend to read proper SonyEricsson service manuals.)
TP Full Unlocker does not destroy phone calibration data (so typical for SeTool ... )
For the phone safety, TestPointing requires UC-20 TP cable.
Unlike other amateur solutions which use external battery connection to the TP, our software uses specially designed UC-20 cable which can handle different bus voltages and prevents any potential flash chip damage.
TP is done in two stages. Once you complete TP stage 1 you don't need to repeat it anymore. Phone is then bootable via the 2nd testpoint anytime.
PDF manual is available after installation as usual in Documents folder [/font]
[font=georgia,times]
大意是：
这个是CR推出的迄今市场上最安全的测试点全解和修复gdfs的平台，使用的是CR小组自行研制的UC-20带测试点的刷机线，拥有自动调节电压的功能，能最大程度的保护主版元件！现只支持所有CID的db2020型号！
解锁方法仍然是采用两个测试点的方法，但是有一点好处，就是做完了第一个测试点了以后，以后就不用再重新做了，可以在任何时候直接做第二个测试点来完成解锁或者修复gdfs！
具体的测试点，解锁方法和流程在平台安装的开始菜单下的document里有介绍。[/font]
[font=georgia,times][/font]
[font=georgia,times]新的CR测试点盒子[/font][font=georgia,times]浏览附件cruisersuitebox1.gif 浏览附件cruisersuitebox2.gif [/font]