我是用电源调到3。3V地接手机正点TP是不是可以。我从板上飞了两个TP线。就是这个点法是怎么点的我就不明白了是不是到出ATTACH TP #1 AND PRESS "READY"这个了就始终点住TP点还是点一下我都试了为什么我的机器就是过不去还是哪里的问题我就弄不明白了都点一天了呵呵见笑了。
v0.914037/UNI
CARD SERIAL: 00051661
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 64 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 68 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
PROCEDURE WAS STOPPED BY USER
Elapsed: 2 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
verify block error
last blk:44040000,00010000
Elapsed: 51 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 57 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
verify block error
last blk:44070000,0000FFF0
Elapsed: 51 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 7 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 1 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 32 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
unknown ChipID (62C7), RETRY
Elapsed: 13 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
unknown ChipID (5A16), RETRY
Elapsed: 2 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 59 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 9 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
FLID fail
Elapsed: 18 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 72 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 82 secs.
v0.914037/UNI
CARD SERIAL: 00051661
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 64 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 68 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
PROCEDURE WAS STOPPED BY USER
Elapsed: 2 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
verify block error
last blk:44040000,00010000
Elapsed: 51 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 57 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
verify block error
last blk:44070000,0000FFF0
Elapsed: 51 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 7 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 1 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 32 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
unknown ChipID (62C7), RETRY
Elapsed: 13 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
unknown ChipID (5A16), RETRY
Elapsed: 2 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 59 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Elapsed: 9 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
FLID fail
Elapsed: 18 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 72 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35220701244219 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER
Elapsed: 82 secs.