我的k800涮机之后没一天就用不了了。再次涮时显示出不能！！如下所示
00:44:59| Shutting down...
00:53:36| XS++ v2.2 Ready !
00:53:36| Executed on Microsoft Windows XP
01:05:04|
01:05:04| Attempting to open the interface...
01:05:04|
01:05:04| Turn off phone
01:05:04| Hold 'C' button on phone and connect phone.
01:05:04| You have 30 seconds.
01:05:04|
01:05:37| Error: Cannot open phone communication port
01:05:39| Disconnected... Unplug the phone
01:05:39| Shutting down...
01:05:41| XS++ v2.2 Ready !
01:05:41| Executed on Microsoft Windows XP
01:05:59|
01:05:59| Attempting to open the interface...
01:05:59|
01:05:59| Turn off phone
01:05:59| Hold 'C' button on phone and connect phone.
01:05:59| You have 30 seconds.
01:05:59|
01:06:08| Baseband ID: 9900
01:06:08| Hardware Platform: DB2020
01:06:08| Protocol Version: 3.1
01:06:08| Phone name detected!
01:06:08|
01:06:08| Profiling SEMC phone...
01:06:08| Baseband ID: DB2020
01:06:08| OTP CID: 49
01:06:08| EROM CID: 52
01:06:08| EROM Color: Red
01:06:08| IMEI: 35170701xxxxxx
01:06:08| Phone ID: K800
01:06:08| Network: CHINA
01:06:08| CDA: CDA102511/101 R1A
01:06:08| Firmware Version: R1JC002
01:06:08| EROM: R3A016
01:06:08| Ready for operation!
01:06:30|
01:06:30| Sending db2020_cid01_prodid_p3j.bin...
01:06:30| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
01:06:30| This is a PRODUCTION_ID loader
01:06:30|
01:06:30| Sending db2020_mem_patcher_cid52_r2a006.bin...
01:06:31| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
01:06:31| This is a MEM_PATCHER loader
01:06:31|
01:06:31| Sending db2020_cid52red_flash_r2a005.bin...
01:06:31| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
01:06:31| This is a FLASH loader
01:06:31| Now flashing firmware main...
01:06:32| Flashing d:\涮机软件\k800_r1jc002_main_china_wi_red51.mbn
01:06:32| Header type: BABE
01:06:32| 460 flashblocks
01:06:32| Binary acknowledge failed with: 89
01:06:32| Failed
01:06:32| Binary acknowledge failed with: 68
01:06:32| Command: Error 0x68
01:06:32| Failed sending flashblock 1. Returnvalue 0xB13A8B10
01:06:32| Finishing flash
01:06:33| Binary acknowledge failed with: 02
01:06:33| Failed
01:06:33| Failed
01:06:53| Error: Flashing failed
01:06:53| Disconnected... Unplug the phone
我不知道怎么办才好，请各位仁兄慈妹可以帮我的忙！！在这告诉我！或者发到的我邮箱！我的邮箱是271690465@qq.com
谢谢
00:44:59| Shutting down...
00:53:36| XS++ v2.2 Ready !
00:53:36| Executed on Microsoft Windows XP
01:05:04|
01:05:04| Attempting to open the interface...
01:05:04|
01:05:04| Turn off phone
01:05:04| Hold 'C' button on phone and connect phone.
01:05:04| You have 30 seconds.
01:05:04|
01:05:37| Error: Cannot open phone communication port
01:05:39| Disconnected... Unplug the phone
01:05:39| Shutting down...
01:05:41| XS++ v2.2 Ready !
01:05:41| Executed on Microsoft Windows XP
01:05:59|
01:05:59| Attempting to open the interface...
01:05:59|
01:05:59| Turn off phone
01:05:59| Hold 'C' button on phone and connect phone.
01:05:59| You have 30 seconds.
01:05:59|
01:06:08| Baseband ID: 9900
01:06:08| Hardware Platform: DB2020
01:06:08| Protocol Version: 3.1
01:06:08| Phone name detected!
01:06:08|
01:06:08| Profiling SEMC phone...
01:06:08| Baseband ID: DB2020
01:06:08| OTP CID: 49
01:06:08| EROM CID: 52
01:06:08| EROM Color: Red
01:06:08| IMEI: 35170701xxxxxx
01:06:08| Phone ID: K800
01:06:08| Network: CHINA
01:06:08| CDA: CDA102511/101 R1A
01:06:08| Firmware Version: R1JC002
01:06:08| EROM: R3A016
01:06:08| Ready for operation!
01:06:30|
01:06:30| Sending db2020_cid01_prodid_p3j.bin...
01:06:30| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
01:06:30| This is a PRODUCTION_ID loader
01:06:30|
01:06:30| Sending db2020_mem_patcher_cid52_r2a006.bin...
01:06:31| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
01:06:31| This is a MEM_PATCHER loader
01:06:31|
01:06:31| Sending db2020_cid52red_flash_r2a005.bin...
01:06:31| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
01:06:31| This is a FLASH loader
01:06:31| Now flashing firmware main...
01:06:32| Flashing d:\涮机软件\k800_r1jc002_main_china_wi_red51.mbn
01:06:32| Header type: BABE
01:06:32| 460 flashblocks
01:06:32| Binary acknowledge failed with: 89
01:06:32| Failed
01:06:32| Binary acknowledge failed with: 68
01:06:32| Command: Error 0x68
01:06:32| Failed sending flashblock 1. Returnvalue 0xB13A8B10
01:06:32| Finishing flash
01:06:33| Binary acknowledge failed with: 02
01:06:33| Failed
01:06:33| Failed
01:06:53| Error: Flashing failed
01:06:53| Disconnected... Unplug the phone
我不知道怎么办才好，请各位仁兄慈妹可以帮我的忙！！在这告诉我！或者发到的我邮箱！我的邮箱是271690465@qq.com
谢谢