[i=s] 本帖最后由 蓝色刀刀 于 2009-7-4 15:40 编辑 [/i]
E51资料（RM-426_APAC_401.34.011_v4.0）
大小：72.5MB
共9 PART.
RM-426 Phone Data Package APAC v4.0
========================================
Creation date: Wed May 27 10:47:33 2009
Important notes
-----------------------------------------
*NOTE Please see the requirements below.
**NOTE We recommend the removal of previous RM-426 data package
Otherwise some old images are shown in SW update (for those that don't have
new versions in this distribution)
***NOTE /!\Phoenix must be closed when installing this Data Package.
Requirements
-----------------------------------------
- Phoenix Internal Service Software A 2006.40.1.245 (or newer)
- At least 40Mb of SRAM required in the FPS8-prommer!
- Flash Update package RnD
- FPS8 or FPS10 prommer or USB cable (DKU-2) for USB flashing
Software version
-----------------------------------------
401.34.011
Flashing information
----------------------------------------
InstallShield 14.0 has been used to build this Data Package.
Common Setting files:
- bluetooth.ini
- adcreadings.ini
- rm_426_als.ini
- audiocontrol.ini
- ledcontrol.ini
- phoneinfo.ini
- vibracontrol.ini
Transceiver: 0560518: RM-426 CTR APAC3 AUSTRALIA WHITE STEEL
Images:
- rm426_40134011_prd.c00
- rm426_40134011_prd.v16
- rm426_40134011.01U
Other files:
- rfconf_RM-426.xml
- RM426.xml
- hwconf_RM426.xml
- wlan_gen2.xml
- rm426_apac.xml
- 057345v1.pcx
- RM-426_TypeLabel_001.xml
Transceiver: 0564787: RM-426 CTR APAC3 NZ White Steel
Images:
- rm426_40134011_prd.c00
- rm426_40134011_prd.v16
- rm426_40134011.01U
Other files:
- rfconf_RM-426.xml
- RM426.xml
- hwconf_RM426.xml
- wlan_gen2.xml
- rm426_apac.xml
- 057344v1.pcx
- RM-426_TypeLabel_001.xml
Transceiver: 0560517: RM-426 CTR APAC1 WHITE STEEL
Images:
- rm426_40134011_prd.c00
- rm426_40134011_prd.v14
- rm426_40134011_14.14U
Other files:
- rfconf_RM-426.xml
- RM426.xml
- hwconf_RM426.xml
- wlan_gen2.xml
- rm426_apac.xml
- 057349v1.pcx
- RM-426_TypeLabel_001.xml
E51资料（RM-426_APAC_401.34.011_v4.0）
大小：72.5MB
共9 PART.
RM-426 Phone Data Package APAC v4.0
========================================
Creation date: Wed May 27 10:47:33 2009
Important notes
-----------------------------------------
*NOTE Please see the requirements below.
**NOTE We recommend the removal of previous RM-426 data package
Otherwise some old images are shown in SW update (for those that don't have
new versions in this distribution)
***NOTE /!\Phoenix must be closed when installing this Data Package.
Requirements
-----------------------------------------
- Phoenix Internal Service Software A 2006.40.1.245 (or newer)
- At least 40Mb of SRAM required in the FPS8-prommer!
- Flash Update package RnD
- FPS8 or FPS10 prommer or USB cable (DKU-2) for USB flashing
Software version
-----------------------------------------
401.34.011
Flashing information
----------------------------------------
InstallShield 14.0 has been used to build this Data Package.
Common Setting files:
- bluetooth.ini
- adcreadings.ini
- rm_426_als.ini
- audiocontrol.ini
- ledcontrol.ini
- phoneinfo.ini
- vibracontrol.ini
Transceiver: 0560518: RM-426 CTR APAC3 AUSTRALIA WHITE STEEL
Images:
- rm426_40134011_prd.c00
- rm426_40134011_prd.v16
- rm426_40134011.01U
Other files:
- rfconf_RM-426.xml
- RM426.xml
- hwconf_RM426.xml
- wlan_gen2.xml
- rm426_apac.xml
- 057345v1.pcx
- RM-426_TypeLabel_001.xml
Transceiver: 0564787: RM-426 CTR APAC3 NZ White Steel
Images:
- rm426_40134011_prd.c00
- rm426_40134011_prd.v16
- rm426_40134011.01U
Other files:
- rfconf_RM-426.xml
- RM426.xml
- hwconf_RM426.xml
- wlan_gen2.xml
- rm426_apac.xml
- 057344v1.pcx
- RM-426_TypeLabel_001.xml
Transceiver: 0560517: RM-426 CTR APAC1 WHITE STEEL
Images:
- rm426_40134011_prd.c00
- rm426_40134011_prd.v14
- rm426_40134011_14.14U
Other files:
- rfconf_RM-426.xml
- RM426.xml
- hwconf_RM426.xml
- wlan_gen2.xml
- rm426_apac.xml
- 057349v1.pcx
- RM-426_TypeLabel_001.xml