N900 hangup successfully flashed/updated by MAEMO Flasher 3.5

M

monkey1629

普通会员

2010-01-27

#1

N900 hangup successfully flashed/updated by MAEMO Flasher 3.5

phone looks like this one.....for the newbies or not familiar this phone

status of the phone upon arrival, nokia only then you will see the 5 dotted white circles on the center

you need the following:
1.firmware -you can download it from navifirm.. If you have no navifirm ( navifirm.exe - 72 Kb)
..use the latest version, sample i am using this firmware
RX-51_2009SE_2.2009.51-1.003_PR_F5_003_ARM

for convenience download it here: http://depositfiles.com/files/be78stu6o
2.maemo_flasher-3.5_2.5.2.2
http://depositfiles.com/files/0fenjtg5n
3.usb cable

intructions:
* Download and install the maemo flasher
* Download the latest firmware (.bin) file and save to ‘c:\Program Files\maemo\flasher-3.5\’
so it is the content of folder flasher-3 .5
* Connect the USB cable while pressing ‘u’ key on the N90 0

M

monkey1629

普通会员

2010-01-27

#2

1. Turn off Maemo device
2. Press and hold down key ‘u’
3. Connect USB cable between Maemo device and host PC while holding down key ‘u’
4. When USB cable gets connected it powers Maemo device and set’s it to flashing mode
5. When USB icon appears on right upper corner Maemo device is in flashing mode
6. You can release key ‘u’
* Run the following command:

flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1.003_PR_F5_003_ARM.bin -f -R

The update will take about 4 minutes after which the N900 will reboot and display the Welcome screen with Regional settings.