【求助】传游戏的问题

qibin3721

普通会员
2004-05-10
88
0
0
在看过传游戏的教程后顺利传进E108三个游戏 tanke motoGP RichManTaiwan 在运行游戏 RichManTaiwan时偶有死机 之后用同样的方法传其他游戏 手机总是提示错误 而我的java是空间59%已用 机子版本是E2 传游戏用的教程如下:
1 手机用数据线与开机的E708连接
  2 打开windows Xp网上邻居-新的连接向导-设置高级连接-直接连接到其它计算机-
主机-选择你数据线连接的COM口(com1或com2)
  3 新建了“传入”连接,右击鼠标选属性-常规--两台计算机间连接(com1或com2)
-用户栏-全选(打勾)-选不需要密码-本com口速率选115200
  以上设置完后在手机上输入#*536963#
  再输入#*5737425# ,选第一项(只能选一次,不然会白屏),这时,电脑上应该会建立
一个新连接。
  4 下载Uploader.exe 找到JAVA加进去
  选择手机上的 "2.Serial Download"
  5 游戏下载完后,回到待机状态再输入#*5737425#并选- "2.Serial Download",一直重
复这步,只到JAVA下载完为止。
  6 应注意:
  jAVA游戏不能放在中文目录下,用英文目录
 

paulweixg

普通会员
2004-07-01
189
0
0
我试了,但是电脑上应该会建立一个新连接没有出现,而且选第一项就出现白屏,接着重新开机了。
E108 E2 (hang)。
 

qibin3721

普通会员
2004-05-10
88
0
0
可以用啊 我的就是108 只是用了一次就不行了 不知道怎么了 可能是游戏不兼容吧
 

paulweixg

普通会员
2004-07-01
189
0
0
qibin3721 说:
可以用啊 我的就是108 只是用了一次就不行了 不知道怎么了 可能是游戏不兼容吧
就成功过一次,是传java还是连接。其他,教程和软件能不能给我个URL。谢了
游戏没有什么特殊要求吧,从TFS分离出来的,都应该好用吧。
 

paulweixg

普通会员
2004-07-01
189
0
0
我也成功过一次,传的是词典,第二次就不行了.
关键是要设置对,串口的速度和,接入的速度要为115200,硬件。

转载52samsung网友和uploader的作者的对话

Hello zileyuan,

Short instruction:

How does it work
This program functions as a simple http server for java downloads.
it also does some other tasks like renaming .JAR and .JAD files and
modifying .JAD sometimes.

In order to make it work you should set up a PPP connection betwen
your computer and your phone:
- Enter the following code on your phone #*536963# it enables PPP over
Serial interface
- Make windows accept incoming connections through serial cable. in
windows XP it is done in the following way: Start -> Connections ->
Create new connection -> Connect to another computer -> accept
incoming connections. then select your serial port. also make sure you
select that windows can accept unauthorized connections form palms,
phones etc..
Sometimes your serial port is not shown in the device list. then you
should go to Control panel -> modems. delete samsung GPRS modem if
present. Then click install new modem, check that you want to select
modem manually from a list. then go to [standart modems] and select
serial cable, choose the correct COM port. and dont forget to set
115200 baud rate, 8 data bits, none parity, 1 stop bits.
Now windows should be able to accept connections on this port.
- on your phone enter #*5737425# (#*JSERIAL#) and select PPP_UP
If everithing goes OK windows will establish new PPP connection.
(*)now start uploader select midlets to install. enter #*5737425#
and select serial download (2-nd option).
repeat (*) until all java is installed :)

As far as i know by this time only serial (COM port) cable is
supported. its not uploader bug, just noone knows how to create a PPP
connection in windows using USB cable or IrDA :) If you can, please
write me :)

--
Best regards,
Alexandr