<b><COLOR=green>S300M/C1_DIY的天堂：进来看看，准会

[zoulian]

最初由 晴子小姐 发布
那就没办法了，只能用Win98、Win2000~~~

建议：现在的机器都已挺先进了，装两个操作系统是没问题的:$

谢谢晴子小姐！

 

[anson_lin]

今天终于成功拉。:*

 

[xlptt]

我刷那个翻盖远景替换为人声的铃声，把机器刷的开不了机了！怎么办啊～？:_( :_( :_(

 

[xlptt]

I E68 15:32:03 ThreadProtocol started
I E69 15:32:03 Opened COM1 at 115200 baud
I E70 15:32:03 PC transfer speeds (COM1): 57600 115200
I E71 15:32:03 Loading S-record file: <E:\S300M\刷机工具\S3M_OPTI\S300M.sre>, RangeCheck=Off
I E72 15:32:03 There is 1 memory region in the S-record file:
I E73 15:32:03 1: 0x00000000 - 0x000043ff = 17408 Bytes
I E74 15:32:03 Loading S-record file: <E:\S300M\刷机工具\S3M_OPTI\S300M-wjt.sre>, RangeCheck=On
I E75 15:32:05 There is 1 memory region in the S-record file:
I E76 15:32:05 1: 0x00000000 - 0x00ffffff = 16777216 Bytes
I E77 15:32:05 SendFile=E:\S300M\刷机工具\S3M_OPTI\S300M.sre, Mode=3
I E78 15:32:05 Power on mobile !
I E79 15:32:06 TalkToBootloader (using COM1)
I E80 15:32:06 Talking to passive bootloader
I E81 15:32:12 Bootloader V2.2 using UART1
I E82 15:32:12 ROM mask ID: 0x00004544 ( ED)
I E83 15:32:12 ID register: 0x000203bb (Trident II)
I E84 15:32:12 Bootloader type: 3
I E85 15:32:12 Max. transfer size: 2176 bytes
I E86 15:32:12 Send: 0x00000000 - 0x000007ff (=2048)
I E87 15:32:12 Send: 0x00000800 - 0x00000fff (=2048)
I E88 15:32:13 Send: 0x00001000 - 0x000017ff (=2048)
I E89 15:32:13 Send: 0x00001800 - 0x00001fff (=2048)
I E90 15:32:13 Send: 0x00002000 - 0x000027ff (=2048)
I E91 15:32:13 Send: 0x00002800 - 0x00002fff (=2048)
I E92 15:32:13 Send: 0x00003000 - 0x000037ff (=2048)
I E93 15:32:14 Send: 0x00003800 - 0x00003fff (=2048)
I E94 15:32:14 Send: 0x00004000 - 0x000043ff (=1024)
I E95 15:32:14 TalkToBootloader: OK
I E96 15:32:14 SendFile=E:\S300M\刷机工具\S3M_OPTI\S300M-wjt.sre, Mode=0
I E97 15:32:14 TalkToFlashloader (using COM1)
I E98 15:32:14 Switching over to flash loader
I E99 15:32:14 COM1 is connected to UART1
I E100 15:32:14 Sync&#39ing to flash loader
I E101 15:32:14 Querying device information
I E102 15:32:14 Flash loader version: V3.52
I E103 15:32:14 Max. TX/RX size: 65536/32768
I E104 15:32:14 Mobile transfer speeds: 57600, 115200, 230400, 460800
I E105 15:32:14 Detected flash chips: 2
I E106 15:32:14 1: Manufacturer: 0x89, Device: 0x8855
I E107 15:32:14 2: Manufacturer: 0x89, Device: 0x8854
I E108 15:32:14 0x89/0x8855: Intel 28F640xW30, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E109 15:32:14 0x89/0x8854: Intel 28F640xW30_, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E110 15:32:14 Total flash size: 16 MB (16777216 Bytes) in 270 sectors
I E111 15:32:14 TalkToFlashloader: OK
I E112 15:32:14 There are no reserved regions defined
I E113 15:32:14 Data to be transferred: 16 MB (16777216 Bytes)
I E114 15:32:14 Setup
I E115 15:32:14 Sector: 0
I E116 15:32:14 VerifyData: 0x00000000 - 0x00001fff
I E117 15:32:14 Sector: 1
I E118 15:32:14 VerifyData: 0x00002000 - 0x00003fff
I E119 15:32:14 Sector: 2
I E120 15:32:14 VerifyData: 0x00004000 - 0x00005fff
I E121 15:32:14 Sector: 3
I E122 15:32:14 VerifyData: 0x00006000 - 0x00007fff
I E123 15:32:14 Sector: 4
I E124 15:32:14 VerifyData: 0x00008000 - 0x00009fff
I E125 15:32:14 Sector: 5
I E126 15:32:14 VerifyData: 0x0000a000 - 0x0000bfff
I E127 15:32:15 Sector: 6
I E128 15:32:15 VerifyData: 0x0000c000 - 0x0000dfff
I E129 15:32:15 VerifyData: Detected difference (0x8bef03e5 != 0x54e59744)
I E130 15:32:15 OpenSector: 6, 0x0000c000, 8192, 0x03
I E131 15:32:15 SendData: 0x0000c000 - 0x0000cfff
I E132 15:32:15 SendData: 0x0000d000 - 0x0000dfff
I E133 15:32:16 CloseSector: 6
I E134 15:32:16 Sector: 7
I E135 15:32:16 VerifyData: 0x0000e000 - 0x0000ffff
I E136 15:32:16 Sector: 8
I E137 15:32:16 VerifyData: 0x00010000 - 0x0001ffff
I E138 15:32:17 VerifyData: Detected difference (0x1279e14b != 0x240dd54b)
I E139 15:32:17 OpenSector: 8, 0x00010000, 65536, 0x03
I E140 15:32:18 Cmd OPEN FAILED: Err:502, 8=0x8, 65536=0x10000, 6=0x6, 0=0x0
I E141 15:32:18 Retry 1: OpenSector
I E142 15:32:18 OpenSector: 8, 0x00010000, 65536, 0x03
I E143 15:32:19 Cmd OPEN FAILED: Err:502, 8=0x8, 65536=0x10000, 6=0x6, 0=0x0
I E144 15:32:19 Retry 2: OpenSector
I E145 15:32:19 OpenSector: 8, 0x00010000, 65536, 0x03
I E146 15:32:20 Cmd OPEN FAILED: Err:502, 8=0x8, 65536=0x10000, 6=0x6, 0=0x0
I E147 15:32:20 Retry 3: OpenSector
I E148 15:32:20 OpenSector: 8, 0x00010000, 65536, 0x03
I E149 15:32:21 Cmd OPEN FAILED: Err:502, 8=0x8, 65536=0x10000, 6=0x6, 0=0x0
I E150 15:32:21 Retry 4: OpenSector
I E151 15:32:21 OpenSector: 8, 0x00010000, 65536, 0x03
I E152 15:32:22 Cmd OPEN FAILED: Err:502, 8=0x8, 65536=0x10000, 6=0x6, 0=0x0
I E153 15:32:22 Giving up on OpenSector
I E154 15:32:22 SendFile: 14 (ERROR_TOO_MANY_RETRIES)
I E155 15:32:22 ReLoad: 14 (ERROR_TOO_MANY_RETRIES)
I E156 15:32:22 Error code: ERROR_TOO_MANY_RETRIES
E E157 15:32:22 Sorry, an error has occured ! (ERROR_TOO_MANY_RETRIES)
I E158 15:32:22 ThreadProtocol finished
I E159 15:32:22 ThreadProtocol: 14
I E160 15:32:22 ThreadGUI finished

 

[hanwu]

第 4 贴：回复: 回复:是S00M/C1的，近来看看，准会有收获的喔
引用:最初由 hanwu 发布
给你评4分，因为你没有做出S300M的软件


拜托，请你看清楚，好吗？


呵呵我是指版本软件，就是说你哪天来个晴子S308M，要带MMS和JAVA的哦

顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶

 

[晴子小姐]

楼上的~~如你有这方面的要求，你也就只能等待8G将来的研制成果，相信300M很快就会很“厉害”的~~

 

[晴子小姐]

最初由 xlptt 发布
我刷那个翻盖远景替换为人声的铃声，把机器刷的开不了机了！怎么办啊～？:_( :_( :_(

把你的详细情况告诉我，Q我吧~~

 

[vicentwang77]

用:最初由 jijiozhongyi 发布
奇怪呀，我刷玩是显示ALL IS WELL呀
好像S300同S300M的图片地址都是一样的，我用G2版的外屏待机图，天线，电池，内屏天线，电池，LOGO，开关机动画，来替换我的S300M，都没有出现什么问题。
我用G2的来替换内置铃声，也没有出现开不了机，只是原来的内置铃声都没有声音了。



既然那么好你干嘛不刷G2呢？
你到底是S300，还是S300M的？...既然你对S300M存在的问题都没有一个确实的答案，那麻烦你不要在我的主题里乱讲一通，免得悟道他人！谢了...


其实有些图片的地址是重合的,比如外屏开机图片、内屏收索图片、内屏关机图片是可以用的，但内屏开机图片的地址是不一样的，g2的部分图片资源可以用，但铃声不行

 

[晴子小姐]

楼上的，我的建议是，你不管你以上所讲的对错与否，为了您宝贝的手机的安全着想，还是什么版本的，最好就刷回什么版本的东东~~~~因为，在DIY里显示，G2的地址本是和适合S300M的地址本是完全分开的~~~~:$

GOOD LUCK~~;-D

 

[晴子小姐]

持续更新~~~

绝对“蓝色”独家→内屏分组[5]

 

[vicentwang77]

我也帮帮忙上几个吧

 

[anson_lin]

我每天早上都帮你顶。/。。

 

[lyicdh]

顶

 

[zhs]

顶

 

[anson_lin]

没上一阵就变咗甘后。。五得。。。我帮你顶。。。。。。。。。

上去。。。:*

 

[anson_lin]

我再顶，。。。。

 

[anson_lin]

今日太得闲拉，，又顶

 

[vicentwang77]

晴子,你那个星座开机好象刷了没反应啊,你的成功了吗,我实验过很多次都不行

 

[lingjian]

顶～～～～

 

[阿奇]

我也来顶
但我台S308M一直在一个角落里修病假.涮了8G的G2版就死撬撬了,
我都涮了N个版本的S300M软件了就是不开机要么就白屏,
晴子你有办法吗?