NOKIA刷机求助,交流贴

nbtx1

普通会员
2005-05-01
86
0
0
我的6280用MT-BOX不能写,我用的是FBUS线,能进入测试模式,在查除现时间的时候就停了
 

nbtx1

普通会员
2005-05-01
86
0
0
Processing File: rm7830006.430.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35186101047752.r3c
Erase RAP3 [00000000 - 000202BF]
Erase RAP3 [00020300 - 000252FF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00200000 - 0037FFFF]
Erase RAP3 [00380000 - 011DDFFF]
Erase RAP3 [011DE000 - 011DEFFF]
Erase RAP3 [011DF000 - 011DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase[17.77 MB]...
Waiting response for 320 Sec...
%%%%%%%% ERROR ERASING:
Failed at address 010028CB
 

procyon

普通会员
2007-03-26
4
0
0
本人用mt-box刷了不少机子 大部分修复了 也有一些挂掉 ..[s:76]

小小经验:

1.备份PM/RPL,否则后果很严重

2.服务提供商SP锁现在可以用mt-box界面提供的 dejan方案搞定

3.用户密码(恢复原厂必须) 只需通过fbus线连接 进入local模式 然后按"reset usercode"即可 重置
同时可以读出当前密码 呵呵

4.如果第一点失误 覆盖了错误的simlock数据 可以通过ask2rpl服务 来购买rpl文件 呵呵
NSS和mt-box都可以 需要20欧元左右 哎.....

5.BB5降级刷死了 可以刷空板 现在mt-box有个通用的BB5Erase_uni_rap.bin擦除文件,很方便!

呵呵 暂时写这点 以后再加
 

nbtx1

普通会员
2005-05-01
86
0
0
我的主板是OK的,试好没问题的.而且有好多台都是这样.那到JAF上又可以写好.
 

nbtx1

普通会员
2005-05-01
86
0
0
主板和硬件都是好的就是有MT写不了                             
Waiting response for 320 Sec... +5S>"KAUt0
%%%%%%%% ERROR ERASING: 793 15A
Failed at address 010028CB
就停了
 

sdg10000

普通会员
2006-09-04
17
0
0
Phoenix跟NokiaSoftwareUpdater问题,请帮忙解答一下!!
Phoenix可以刷5200 5300 6300。这些都没问题,不过一刷N72 N70就刷不过,但也刷不死
刷N70
Initializing
Initializing
Detecting FLS device.
FLS device not detected.
Starting the flashing
Starting USB flashing.
Cmt->Reading image file data...
Cmt->Trying to verify communication 1 of 8
Cmt->Communication verified to AdlServer.
Cmt->AdlServer: Phone info requested succesfully
Cmt->Found CMT AdlLoader file: C:\Program Files\Common Files\Nokia\Tss\flash\ADLREVC00-0540-2.adl
Cmt->Found APE AdlLoader file: C:\Program Files\Common Files\Nokia\Tss\flash\ADLREVA00.adl
Cmt->Trying to verify communication 1 of 7
Cmt->Communication verified to AdlServer.
Cmt->Flash file code succesfully read from file
Cmt->AdlServer: AdlLoader code reflash request sent succesfully
Cmt->Sending Loader code: 30%
Cmt->Sending Loader code: 60%
Cmt->Sending Loader code: 100%
Cmt->AdlServer: AdlLoader code succesfully sent to phone
Ape->Trying to verify communication 1 of 7
Ape->Communication verified to AdlServer.
Cmt->Flash file code succesfully read from file
Ape->AdlServer: AdlLoader code reflash request sent succesfully
Ape->Sending Loader code: 10%
Ape->Sending Loader code: 30%
Ape->Sending Loader code: 50%
Ape->Sending Loader code: 60%
Ape->Sending Loader code: 80%
Ape->Sending Loader code: 100%
Ape->AdlServer: AdlLoader code succesfully sent to phone
Ape->Trying to verify communication 1 of 3
Ape->Communication verified to AdlServer.
Ape->AdlServer running...
Cmt->Ready for reboot
Ape->Ready for reboot
Ape->Rebooting phone
Ape->Phone rebooted to Adl flash mode
Ape->Trying to verify communication 1 of 80
Ape->Trying to verify communication 2 of 80
Ape->Trying to verify communication 3 of 80
Ape->Communication verified to Adl Loader
Cmt->Estimated flashing time 4 min 0 sec
Cmt->Trying to verify communication 1 of 1
Cmt->Failed to verify communication.
Cmt->Trying to verify communication 1 of 3
Cmt->Trying to verify communication 2 of 3
Cmt->Trying to verify communication 3 of 3
Cmt->Failed to verify communication.
Cmt->CMT loader does not start
Starting the flashing
Starting USB flashing.
Cmt->Trying to verify communication 1 of 8
Cmt->Trying to verify communication 2 of 8
Cmt->Trying to verify communication 3 of 8
Cmt->Trying to verify communication 4 of 8
Cmt->Trying to verify communication 5 of 8
Cmt->Trying to verify communication 6 of 8
Cmt->Trying to verify communication 7 of 8
Cmt->Trying to verify communication 8 of 8
Cmt->Failed to verify communication.
Product flashing failed.




NokiaSoftwareUpdater刷N70 N72那些也没问题,不过刷5200 5300 6300这些就有些麻烦了,软件提示刷完后机子跟刷机前一样,没刷进去

请问各位这些问题怎么解决
先谢谢了!!!
 

tadpole

普通会员
2004-07-15
394
0
0
引用第67楼0107028于2007-06-02 10:36发表的 :
郁闷,6680怎么才能刷进啊,一直都是1st Boot Err: Process Failed, Repowering Mobile
我都一直用手按着,接触应该不是问题,而且6630也是一样,也是同一个错误,别的机子倒是能刷.6100.3120.NG.7610都刷成功过,就是6680刷不了,是什么原因啊
你用什么平台刷呢?机子原来有没有故障的!?一般用MT,UFS刷不了的用JAF可以刷过去!特别是这些BB5的
 

独孤冷漠

普通会员
2007-03-11
117
0
0
问一下BBS系列的非大陆机,是不是不能改成中文的呀,因为我刷过一台成中文之后就解不开锁了,装卡要输那个叫什么码的来着,死活解不开!! [s:72] [s:77]