- 主题发起人 6801
- 开始时间
18、Q：Init usb communication..
Found
Starting DEAD USB phone flashing...
Using 06.02.002 jbOzbxR?
Elf2flash 02.31.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
. ..................Loader Sent!
Stage 2 starting.......................................... ...........Loader Sent!
Stage 3 starting..........Phone prepared OK!
Waiting for the phone to boot...
Phone failed to boot in flash mode CMT...
A：一般为手机不支持DEAD USB刷机模式，请使用FBUS线。
Found
Starting DEAD USB phone flashing...
Using 06.02.002 jbOzbxR?
Elf2flash 02.31.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
. ..................Loader Sent!
Stage 2 starting.......................................... ...........Loader Sent!
Stage 3 starting..........Phone prepared OK!
Waiting for the phone to boot...
Phone failed to boot in flash mode CMT...
A：一般为手机不支持DEAD USB刷机模式，请使用FBUS线。
你要帮我,我用DCT4写1110机子时出现这种提示Booting phone...
Phone didn't answer with TX line high after UEM reset!
Causes:
1. BSI line is not connected properly in connector -> Check cable, also for 3.3k resistor in serial with bsi line.
2.UEM damaged -> replace UEM.
MCU ID: 0xCCCC
This MCU ID is not supported in chosen flash file...
Error booting phone...就写不进怎么做??
Phone didn't answer with TX line high after UEM reset!
Causes:
1. BSI line is not connected properly in connector -> Check cable, also for 3.3k resistor in serial with bsi line.
2.UEM damaged -> replace UEM.
MCU ID: 0xCCCC
This MCU ID is not supported in chosen flash file...
Error booting phone...就写不进怎么做??
nokia 6234 不开机，用fbus刷机，出现如下错误。
FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30003.700.mcusw
PPM Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_3003.70.ppm_cvf
CNT Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30003.70.image_cvf
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkish,Portuguese
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30005.430.mcusw
PPM Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_3005.43.ppm_cvf
CNT Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30005.43.image_cvf
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkish,Portuguese
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...
FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30003.700.mcusw
PPM Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_3003.70.ppm_cvf
CNT Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30003.70.image_cvf
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkish,Portuguese
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30005.430.mcusw
PPM Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_3005.43.ppm_cvf
CNT Flash file: C:\Archivos de programa\Nokia\Phoenix\Products\RM-123\rm123_145_30005.43.image_cvf
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkish,Portuguese
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...
J
jone147126
游客
6