..:: All HWK Update ::.. HWK_Support_v02.08.000--2008/09/14

F

fjnokia

社区贡献者

2007-08-19

#21

HWK平台更新（UFS_Suite_Setup_v03.05.006）HWK Release 18/08/2007

--------------------------------------------------------------------------------

Release Date: 18/08/2007

The Official release will be ready in our download area www.ufsxhwk.com.
You can download from here, until the support site can be updated:-

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION

New Support Area Access - All you need is an Original HWK who's HID is in the master database (can be updated with update client), no username, no password, no waiting for activation. - We hope you will all enjoy this small gift and it will make ours and our customers lifes easier

LG_GSM V 2.0.5.6
-----------------
1. API Updated to allow support access (No user update)

SAMs V 2.0.5.6
---------------
1. API Updated to allow support access (No user update)

SeDBx V 1.0.5.6
---------------
1. Initial Public Release - This module will be updated over the next few weeks to become inline with the rest of the HWK Suite of Modules.

Many thanks to all those who have supported us!!

UFS_HWK_Suite_Setup_v3.05.006

F

fjnokia

社区贡献者

2007-09-13

#22

HWK平台更新（UFS_Suite_Setup_v03.05.007）HWK Release 13/09/2007

This release contains a new update client which resolves the cannot open URL message, some users have had over the last few days.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION

LG_GSM V 2.0.5.7
-----------------
1. Infineon SuperGold2 models unlock (KE850,KE970, ...)
2. KE970GO added (KE970G)

SAMs V 2.0.5.7
---------------
TRIDENT
C520,M300,M600,X526 added.

SeDBx V 1.0.5.7
---------------
1. DB2020 User Lock code reset to 0000.
2. GDFS Info (Displays User Lock code for non DB2020 models)

Many thanks to all those who have supported us!!!

UFS_HWK_Suite_Setup_v3.05.007

F

fjnokia

社区贡献者

2007-10-29

#23

HWK平台更新 HWK_Support_Suite_Setup_v02.06.000-- 28/10/2007

Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
New Users or users who un-installed the old version, should download and install the HWK Support Suite and run the client, before trying to install the full HWK Suite

UFS_DCTxBB5 v2.0.6
--------------------

1. Dual Line flashing for BB5 introduced (Required UFS firmware V2.8 2007)
2. All avalaible phones supported (including RAPIDO v1.12, v1.13)
3. "Verify" function for BB5 added.
4. Latest Flash Update pack (7.40.35.29728) supported.
5. Support of Muxed Nand.

UFS_LG_GSM v2.0.6
-------------------

1. KG290 support added.
2. "Support" button, to access support site.

UFS_SAMs v2.0.6
-----------------

COMMON
Remade user interface.
"Support" button, to access support site.
TRIDENT
E950,F200,J600,J600E,J608,U300,U308,X830N added.
Read Codes for J600,J600E,J608
SWIFT
E598,E768,G600 added.
Unlock Codes on Info for D820,D900,E250,E740,G600.

UFS_SeDBx v2.0.6
------------------

1. "Skip Info Checking" allows reflash dead phones.
2. "Support" button, to access support site.

Many thanks to all those who have supported us!!!

UFS_HWK_Suite_Setup_v3.06.000

F

fjnokia

社区贡献者

2008-03-21

#24

HWK平台更新 HWK_Support_Suite_Setup_v02.07.000-- 21/03/2008

Release Date: 21/03/2008

The Official release is ready in our download area http://sarunasoftware.com.

Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: Support Access is via the software modules only, download managers have been disabled.

UFS_DCTxBB5 v2.0.7
--------------------

1. New BB5 products:
RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279,
RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426
(N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1,
N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2)
2. ISM flashing support for BB5 products.
3. Improved DCT4/WD2 Flash Loaders version display.
4. Fixed BB5 PM file open bug.
5. Improved Extended PHONET messages handling.
6. Store of Ext.VPP setting in INI file.
7. Support of new Flash Chips.
8. Fixed CNT flashing for 7370 and 6151.
9. Flash Update pack (7.46.43.30662) added.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK.

UFS_LG_GSM v2.0.7
-------------------

1. KG280, KP200, KP202, MG280 support added.

UFS_SAMs v2.0.7
-----------------

TRIDENT
C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888 ,E958,
F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added.
OM(SYSOL)
C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC 03,
M110,X540,X550 added.
E2P unlock fixed for E420,E428...
Implemented MSL calculation, allows direct unlock
without E2P corruption and shows correct codes.
Rebuild of corrupted Master Key during wrong unlock.
IMEI rebuild for new models (Sysol3)
SWIFT
D880,D888(Duos),E746,G608,L600,L608,M610,M618 added.
Implemented MSL calculation, allows direct unlock, and
show correct codes, without any data lose or setting to
default values of MSL, BTID, IMEI or Radio settings.
E2P Sections Read/Write introduced (compatible with TAT)
IMEI and BTID rebuild.(Imei option for Swift_1 only now)
Fixed bug of 0 length TFS files flashing (affected:
java appletts in D880, E200, E250, G600, M610 products)
COMMON INFO
E2P(hee)sections R/W allows to transfer calibration data,
radio setttings, etc. from product to product, without
damage to other vital data, unlike E2P or FULL clone.
Or allows to Read-Edit-Write well known values.
Warning,
Access to some sections can be denied by firmware, or
can have different values dependand on firmware version.
In case of protected or none existing section will have
result length of 0 or lose of TAT mode.

Many thanks to all those who have supported us!!!

UFS_HWK_Suite_Setup_v2.07.000

F

fjnokia

社区贡献者

2008-05-15

#25

HWK平台更新 HWK_Support_Suite_Setup_v02.07.001-- 14/05/2008

HWK Release 14/05/2008 - Discussion
--------------------------------------------------------------------------------
Release Date: 14/05/2008
The Official release is ready in our download area http://sarunasoftware.com.

Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.7.1
----------------------
1. New BB5 products: RM-337,RM-364,RM-365,RM-366,RM-451
(6300i,3120c-x,8800e-5)
2. New DCT4 products: RM-340,RM-341,RM-362,RM-363
(2600c-2,2600c-2b,5000d-2,5000d-2b)
3. Flash Update pack (8.6.1.31560) added.
4. New RAP, UPP ASIC's and FLASH Chip's support.
5. New DCT4+ product unlock (see corresponding list)
6. BB5 ASK file will be created during "Rd Cert"
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
Many thanks to all those who have supported us!!!

UFS_HWK_Suite_Setup_v2.07.001

F

fjnokia

社区贡献者

2008-05-24

#26

HWK 5月23日最新升级HWK_Suite_Minor_v02.07.002

UFS_DCTxBB5 v2.0.7.2
----------------------
1. New DCT4+ versions support:
1200b(RH-100 v5.06)2600c(RM-340 v561)
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the .
HWK_Suite_Minor_v02.07.002 download here
SAMs V 2.0.7.2
---------------
TRIDENT
B100,B108,B200,B300,S710i added (DUNL,IM,FL)
B100,U600,U600B MSL Repair introduced.
OM(SYSOL)
C420,C420L,C421,C425,C426,X560,X560L,X566
added (DUNL,IM,FL,SECT)
SWIFT
E747.F250,F258,J700 added (DUNL,FL,SECT)
Chinese FOTA products E838, J708 flashing.
Added sectors count for RAW NAND read.
COMMON INFO
Product filter added.
SeDBx v2.0.7.2
---------------
1. USB Flashing introduced.
2. CID53 Support for DB2020 and PNX5230 platforms.
3. CID Upgrade introduced.
4. FS Upgrade files flashing. (FSUPG)
5. GDFS Info now Displays User Lock code for DB2012 models also.

UFS_HWK_Suite_Setup_v2.07.002

F

fjnokia

社区贡献者

2008-09-15

#27

Release Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com.

Please follow the instructions careful on the above page.
The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.8.0
----------------------
1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

LG_GSM V 2.0.8.0
-----------------
v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.

SAMs V 2.0.8.0
---------------
TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.

SeDBx v2.0.8.0
---------------
DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.
USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver
SeDBx Quick Guide has been updated.

下载点这:http://bbs.blueshow.net/read.php?tid=509636