J.A.F. 平台更新信息
- 主题发起人 大连小潘
- 开始时间
Hi
From now on here i'll announce the updates for jaf and related software.
So please check this for latest update.
15-09-2005
JAF version 1.83 beta4:
- improved flashid detection. Wrong flash message will not cause wrong flash id information
- some small bug in dct3 corrected
- added new imei patch engine. New patch will work with JAF only
Regards
JAF
From now on here i'll announce the updates for jaf and related software.
So please check this for latest update.
15-09-2005
JAF version 1.83 beta4:
- improved flashid detection. Wrong flash message will not cause wrong flash id information
- some small bug in dct3 corrected
- added new imei patch engine. New patch will work with JAF only
Regards
JAF
17-09-2005
JAF version 1.83 beta5:
- improved after flash for bb5 in fbus mode
- added PPM flash only for BB5 in fbus mode
- phone is put in test mode after flash for BB5 fbus mode
- Product code change after flash now work for BB5 in fbus mode
- fixed bug in product profile upload when RUN INI for BB5 in fbus mode
- added log status with time stamp (available in support tab, disabled by default)
Regards
JAF
JAF version 1.83 beta5:
- improved after flash for bb5 in fbus mode
- added PPM flash only for BB5 in fbus mode
- phone is put in test mode after flash for BB5 fbus mode
- Product code change after flash now work for BB5 in fbus mode
- fixed bug in product profile upload when RUN INI for BB5 in fbus mode
- added log status with time stamp (available in support tab, disabled by default)
Regards
JAF
23-09-2005
JAF version 1.83 beta7:
- added RUN ALL in selftest for dct4
- added RUN ALL in selftest for bb5 fbus
- added APE and Variant info for bb5 fbus
- added phone reset in local mode after flash session
- added NAND flash info when reading flashid
- fixed bug for factory reset failed after flash on some phones
- fixed bug with selection files using USE INI
- improved start-up for JAF software
- re-written writepm function from scratch. This should fix no signal after write pm problem on wd2 phones.
Regards
JAF
JAF version 1.83 beta7:
- added RUN ALL in selftest for dct4
- added RUN ALL in selftest for bb5 fbus
- added APE and Variant info for bb5 fbus
- added phone reset in local mode after flash session
- added NAND flash info when reading flashid
- fixed bug for factory reset failed after flash on some phones
- fixed bug with selection files using USE INI
- improved start-up for JAF software
- re-written writepm function from scratch. This should fix no signal after write pm problem on wd2 phones.
Regards
JAF
Hi
Final version 1.83 ready.
Also compiled jaf imei tool to support new firmware.
what is new from latest beta:
- added proxy support for support area logon. You need this version to access the support. Older version are obsolete.
Full setup will be ready soon.
Regards
JAF
Final version 1.83 ready.
Also compiled jaf imei tool to support new firmware.
what is new from latest beta:
- added proxy support for support area logon. You need this version to access the support. Older version are obsolete.
Full setup will be ready soon.
Regards
JAF
29-09-2005
JAF ver 1.84 beta3 ready.
- added mm format partition. this fix the mmopen problem on 7280 and 6230i
- fixed reset phone after flash. Now you can flash cnt or ppm even after flashing mcu the phone is still dead. This will help with reported problems on 3220 and 6020.
JAF
JAF ver 1.84 beta3 ready.
- added mm format partition. this fix the mmopen problem on 7280 and 6230i
- fixed reset phone after flash. Now you can flash cnt or ppm even after flashing mcu the phone is still dead. This will help with reported problems on 3220 and 6020.
JAF
30-09-2005
- modified patch for RH-19. now supports mcuid 0x2142
New JAF ver 1.84 beta4:
- added beeps after flash
- fixed bug with logfile when file is missing and option is enabled
- added mcuid skip option in dct4 flash. This option will permit to flash a file even jaf reports that is not supported. Read the warning before.
- fixed RUN INI bug. Files reported in settings file are missing causing JAF to crash.
- added MM format flag. This will solve formating twice causing erasing of gallery in 7280, 6230i etc.
- added busy state when wait for phone to boot.
- modified patch for RH-19. now supports mcuid 0x2142
New JAF ver 1.84 beta4:
- added beeps after flash
- fixed bug with logfile when file is missing and option is enabled
- added mcuid skip option in dct4 flash. This option will permit to flash a file even jaf reports that is not supported. Read the warning before.
- fixed RUN INI bug. Files reported in settings file are missing causing JAF to crash.
- added MM format flag. This will solve formating twice causing erasing of gallery in 7280, 6230i etc.
- added busy state when wait for phone to boot.
11-10-2005
JAF ver 1.84 beta7 is ready.
- modified support logon. You must register the box before accessing support. This limits the posibility of using a not sold box to access support area.
- fixed bug with flash id 0x000000 in dct3. now stoping the flash procedure.
- fixed bug in BT flash for DCT4. Now no more problems with 8910i BT and other phones
- improved unlock for DCT4. Phones like 1600, 1110 and 1101 are supported for lock/unlock. If you have more problems unlocking this phones please report.
- NAI file is handled corectly when flashing.
- LOCAL mode improved for DCT4 and BB5 fbus mode.
- improved CNT pack extraction. This solve the 7260 problem with stoping at cnt.
- erasing flash improved for DCT4 when flash.
JAF ver 1.84 beta7 is ready.
- modified support logon. You must register the box before accessing support. This limits the posibility of using a not sold box to access support area.
- fixed bug with flash id 0x000000 in dct3. now stoping the flash procedure.
- fixed bug in BT flash for DCT4. Now no more problems with 8910i BT and other phones
- improved unlock for DCT4. Phones like 1600, 1110 and 1101 are supported for lock/unlock. If you have more problems unlocking this phones please report.
- NAI file is handled corectly when flashing.
- LOCAL mode improved for DCT4 and BB5 fbus mode.
- improved CNT pack extraction. This solve the 7260 problem with stoping at cnt.
- erasing flash improved for DCT4 when flash.
17-10-2005
Our team present new software in jaf suite.
A unlock code calculator for :
Panasonic: A10x, CL50, G5x/G70, GD55, ST55, X300
NEC: 342, e101
Philips: 568
All codes old and new supported.
To avoid reselling codes only 20 codes are allowed in 60 days. So after 60 days another 20 credits will be added.
This is a free service for original JAF box owners. If you don't like it just don't use it.
This service is without support. If you don't like this then don't use it.
You do not need any cable, any activation, all you need is download the software, connect your JAF box and calculate codes.
It's a beta, if you find bugs, please post it.
Our team present new software in jaf suite.
A unlock code calculator for :
Panasonic: A10x, CL50, G5x/G70, GD55, ST55, X300
NEC: 342, e101
Philips: 568
All codes old and new supported.
To avoid reselling codes only 20 codes are allowed in 60 days. So after 60 days another 20 credits will be added.
This is a free service for original JAF box owners. If you don't like it just don't use it.
This service is without support. If you don't like this then don't use it.
You do not need any cable, any activation, all you need is download the software, connect your JAF box and calculate codes.
It's a beta, if you find bugs, please post it.
We have today new updates for JAF.
1. New flash chip problem solved. Now you can flash the CNT to any of the 3220, 7260, 6020 etc without any problems.
2. CDMA support is started with this version. First we add NFP load. You can load directly NFP pack and JAF will auto select the files inside (nep, llp and cnt). ESN reading instead of imei is also added. We will extend the support of cdma soon as i get more familiar with this phones
3. DCT4 asic 3 is added for unlock, for phones like 8800.
4. Improved after flash for wd2 phones. i hope this will solve MCU Ver failed.
5. DCT4 content pack extraction have more info in process.
6. BB5 fbus mode is selected default.
7. Easy flash cable support is added. If you have this cable check the box in software.
8. Speed of flash writing is improved by almoust 80% on some phones (dct4 and bb5) so you can test and see the difference
9. new loaders supported and available in this setup.
10. Jaf logger was added in setup.
11. small bugs were solved
If you have some problems please post them in forum.
Thanks goes to melakamobile for the flash file 128k paged, it was saved me some time of working also to livewirecebu for sending the 3220 phone to test. For CDMA support and suggestions, thanks go to Jan and Alif. For easy flash support thanks to Catik.
1. New flash chip problem solved. Now you can flash the CNT to any of the 3220, 7260, 6020 etc without any problems.
2. CDMA support is started with this version. First we add NFP load. You can load directly NFP pack and JAF will auto select the files inside (nep, llp and cnt). ESN reading instead of imei is also added. We will extend the support of cdma soon as i get more familiar with this phones
3. DCT4 asic 3 is added for unlock, for phones like 8800.
4. Improved after flash for wd2 phones. i hope this will solve MCU Ver failed.
5. DCT4 content pack extraction have more info in process.
6. BB5 fbus mode is selected default.
7. Easy flash cable support is added. If you have this cable check the box in software.
8. Speed of flash writing is improved by almoust 80% on some phones (dct4 and bb5) so you can test and see the difference
9. new loaders supported and available in this setup.
10. Jaf logger was added in setup.
11. small bugs were solved
If you have some problems please post them in forum.
Thanks goes to melakamobile for the flash file 128k paged, it was saved me some time of working also to livewirecebu for sending the 3220 phone to test. For CDMA support and suggestions, thanks go to Jan and Alif. For easy flash support thanks to Catik.