J.A.F. 平台更新信息

[大连小潘]

Hi

New JAF logger ready version 1.7

-added TOSHIBA TS10i algo free update

 

[大连小潘]

Hi

New JAF version 1.91 beta3 ready.

-fixed crash problem when flashing 6270 with new version
-improved bb5 fbus and usb flashing

 

[大连小潘]

Hi


New JAF Logger version 1.8

-added Panasonic SC3 algo. Free update.

Please don't use this free update to make free codes in MAP and CODES section. We will close the accounts for those users.

]

 

[大连小潘]

Hi

New JAF Setup version 1.91 is ready.

JAF 1.91 final

- added jaf mode change when select different nokia platform
- added DCT3 FLS read
- added DCT3 selftests
- added DCT3 NetMon Reset
- added DCT3 Field Test ON
- added DCT3 NetMon Dev mode
- added DCT3 NetMon Off
(Thanks to NEB for making easier adding DCT3 service options)
- improved DCT3 localmode for contact service phones
- improved flashing erase file for BB5
- improved flashing 6270 (error write on MCU fixed)
- improved AFP on BB5 fbus
- improved flash message reading for BB5 fbus
- improved flash message reading for DCT4
- improved lifetime reset, now detecting 11xx phones and avoid contrast/ligths problem
- other small bugs reported fixed.
- added fia files version 5.51.007

JAF Logger 1.9
- added full names for supported phones

JAF ImeiTool 1.13
- improved flash messages reading for DCT4
- improved lifetimer reset in warranty procedure for 11xx phones.

Fogot to mention, FREE fbus BB5 flashing for everybody.

 

[大连小潘]

New JAF version 1.92 beta1 ready

- added usb flashing for 6270 (flash with version 3.66 and up). Make sure you install usb drivers when phone boot in flash mode in less than 30 seconds. This should work with 7370 also but we don't have yet this phone.
- fixed mcuid wrong when erasing dct4/wd2 phones
- improved dct3 self test
- fixed dct3 flash id BC882000 problem
- other small bugs fixed



BOX OK
J.A.F. by ODEON - ver 1.92 beta1, Customer ID: XXXXXXXX , FW: 01.9F
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
Changing JAF to BB5 mode...Done!
Init usb communication...
Reading product code...
Product Code: 0522804

FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.bin
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.ppm_b
CNT Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.image_b
Changing flashing settings...
Init usb communication...
Reading...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.bin
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.ppm_q
CNT Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.image_q
Searching for phone...Init usb communication...
Found
Reading battery value...3851 mV
Setting local mode...
Init usb flashing...
Reading mcuid... Reading flashid... CMT: 22FE00EC, APE: 00000000
Verifing ADL communication... Status byte 2
ADL->Loader: Update Application Loader -> Single Chip
Loader len: 156992, CHK: 0xEBFE
ADL -> Sending loader...
Waiting for the phone to boot...
Phone is in flash mode...
CMT blocks: 1411, APE blocks: 0
Erasing cmt...
Erasing cmt zone 00180000 - 00B67EDD ...
Erasing cmt zone 00000000 - 000FFFFF ...
Erasing cmt zone 00120000 - 0017FFFF ...
Erasing cmt zone 00C00000 - 0117FFFF ...
Erasing cmt zone 01180000 - 01FDFFFF ...
Erasing cmt zone 00C00000 - 0117FFFF ...
Writing cmt...
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
Rebooting...
Pooling phone...
MCUSW: V 03.66
11-01-06
RM-56
(c) Nokia.
APESW: (null)
VariantSW: (null)
Prodcode: 0522804
Done!

 

[大连小潘]

Hi

New JAF version 1.92 beta2 ready.


- fixed DCT4/WD2/TIKU erase problem. (This time i hope for good)
- fixed 6270 new write problem fbus mode
- improved dct3 flashid 00200090 detection.

 

[大连小潘]

Hi

New setup ready:

JAF 1.92 final

- rewritten loaders selection for DCT3 phones.(hope to solve all flash id problems)
- improved DCT3 powerup in local mode. Contact service phones are booted ok now.
- other small bugs corrected

Included in setup nokia conectivity drivers. For win2k and winxp when you connect usb phones will pick drivers automaticaly.

 

[大连小潘]

Hi

New JAF version 1.93 beta 1 ready.

- solved bug with USE INI on 6280 using usb/fbus connection. However it seems that usb flashing it's not working for 6280. If you still want to test make sure you have fbus cable to revive the phone.
- solved bug with USE INI in DCT4/BB5 to reset files selection.


http://files.odeon.cn/JAF_Main_Softw...AF193beta1.rar

 

[大连小潘]

Hi

New JAF version 1.93 beta2 ready.

- solved problem with unlock in dct4 caused by bug in 1.93 beta1 protection

http://www.blueshow.net/vbb/read.php?tid=231778&keyword=JAF


JAF

 

[大连小潘]

Hi

New version of JAF Logger is ready.

- added Panasonic A210 support
- added log counter display after each calculation
- improved algo for supported phones.

 

[大连小潘]

Hi

New JAF version 1.93 beta3 is ready:

- added DCT3 erase flash
- flash file selection works now with BB5 usb communication, even ini file is missing.
- changed support link for encryption https
- hopefully fixed 7370 write problem with latest flash pack
- other small problems fixed

 

[大连小潘]

Hi

New JAF setup ver 1.93 ready.

- JAF 1.93 final
- have support for latest loaders v. 6.05.003
- improved uniprocesors bb5 phones flashing (fbus mode)
- small bug corrected
- JAF Logger 1.10 (included in setup no changes)

UNINSTALL OLD VERSION BEFORE INSTALL NEW ONE.

 

[大连小潘]

Hi

New JAF version 1.94 beta1 is ready:

- Added USB DEAD PHONE FLASHING for bb5 uniprocesors phones (6270, 7370, 6280 etc)
- Improved USB Live phones flashing BB5 uniprocesors. Now all phones should work on usb flashing.
- Improved USB flashing for BB5 APE phones. N70 with newer version should work ok now.
- Fixed bug when changing product code after flash for uniprocesor phones.


Quick instructions for usb dead phone bb5 uniprocesors:

- Connect jaf box and start the software
- Select BB5 tab, select usb mode
- Select Manual Flash and USE INI
- Select your model and ini
- Press flash
- When software say Searching for phone...Init usb communication... press power on the phone. Software should start flash procedure.

Tested on 6270 ver 3.66 and 7370 4.05


BOX OK
J.A.F. by ODEON - ver 1.94 beta1, Customer ID: 87 , FW: 01.A1
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
Changing JAF to BB5 mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE

FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.53.ppm_c
CNT Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.53.image_c
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.bin
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.ppm_b
CNT Flash file: C:\Program Files\Nokia\Phoenix\products\RM-56\rm56b5003.66.image_b
Booting phone...
Error sync the phone...
Searching for phone...Init usb communication...
Found
Starting DEAD USB phone flashing...
Using 005.045.001
Elf2flash 02.29.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting.......................................... Loader Sent!
Stage 3 starting.........Phone prepared OK!
Waiting for the phone to boot...
Phone is in flash mode...
CMT blocks: 1294, APE blocks: 0
Erasing cmt...
Erasing cmt zone 00180000 - 00B67EDD ...
Erasing cmt zone 00000000 - 000FFFFF ...
Erasing cmt zone 00120000 - 0017FFFF ...
Erasing cmt zone 00C00000 - 0117FFFF ...
Erasing cmt zone 01180000 - 01FDFFFF ...
Erasing cmt zone 00C00000 - 0117FFFF ...
Writing cmt...
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
Rebooting...
Pooling phone...
MCUSW: V 03.66
11-01-06
RM-56
(c) Nokia.
APESW: (null)
VariantSW: (null)
Prodcode: 0522804
Done!

 

[大连小潘]

Hi

New JAF version 1.94 beta2 ready:

- fixed bug with parsing flash file causing 3250 usb flash to crash
- added product code change when flashing bb5 usb.
- few minor changes in usb flashing to optimise the code

 

[大连小潘]

Hi

New JAF version 1.94 beta3


- fixed bug 3250 usb loader, making a crash
- optimised usb flashing code


http://www.blueshow.net/vbb/read.php?tid=231778&keyword=JAF

 

[大连小潘]

Hi


New version of JAF is ready 1.94 beta4

- added DEAD USB mode in bb5 usb flashing. In this way you can use manual flashing and USE INI to select files manualy for live flashing also.
- added full info on BB5 usb mode
- improved bb5 usb flashing.
- increased battery value for flashing. Now must be higher than 3.9V
- added usb communication for DCT4. Now you have few operations but very usefull, READ/WRITE PM, FULL INFO, UNLOCK, PHONE MODE. This will make very easy to unlock, backup phone pm, reading unlock codes. More functions will be added for usb in next versions.

Remember to put your phone in testmode or localmode before unlock for DCT4 usb mode. Tested on 6111, 6230, 6230i. It should work on any phone that suport usb connection.

 

[大连小潘]

Hi

New JAF version 1.94 beta5 ready.

- added master code on INFO in DCT4 and BB5 tab, fbus and usb mode
- added phone mode change for BB5 usb
- added auto USE INI when read INFO if custom ini is not present available to DCT4, BB5 fbus and usb mode
- improved usb flashing for BB5

http://www.blueshow.net/vbb/read.php?tid=233887&keyword=JAF

 

[大连小潘]

Hi

New JAF ready version 1.94 beta7

- Added factory reset after flash in BB5 usb mode.
- Fixed bug causing software closing after some time on users with empty registration
- Improved bb5 usb flashing
- Added a computer license system which will check from time to time your box for updates.

YOU MUST RESTART THE SOFTWARE AFTER PRESSING UPDATE FIRMWARE

 

[大连小潘]

New JAF 1.94 beta8


- fixed Software Disabled due exe protector

 

[大连小潘]

Hi

JAF 1.94 final is ready

- added upload PP for bb5 usb
- added RUN INI for BB5 usb. Now for unsupported phones RUN INI will be disabled.
- added support for USE INI for latest flash pack type (ex. 6125)
- added Code calculator for dct4.
- improved usb flashing.
- corected some small bugs.
- now box status is showed when box disabled.

If you have version 1.93 you can upgrade.
If you have installed version lower than 1.93 you must uninstall first old jaf then install 1.94.

I've compiled jaf.exe without IMEI PATCH for UK users or any users who don't want to have this function.