J.A.F. 平台更新信息

[大连小潘]

New JAF 1.97 beta10

- added N93 flashing support USB and FBUS
- improved use ini function to support new flash pack

For N93 flashing you need Flash Loaders version 6.23.023 or higer.
Download from here
Also If you build your own fbus cable put 68k b/w bsi-gnd and 7.5k in serial with bsi line.
For USB flashing ONLY LIVE USB FLASHING IS POSSIBLE. When you flash by usb after flash phone takes long time to reboot. Even you have phone not found message but on phone display you have test mode then all is ok. Just reconnect phones battery and check the phone.

 

[大连小潘]

Hi

New JAF 1.97 beta11.
This is a quick fix release.

- added E50 flashing support (ONLY FBUS YET). Thx to "The Saint74" for testing.
- fixed USE INI function for 6270, 3250.. files selection
- improved files selection for BB5. Files are scanned on selection for validity.
- added flashing option for bb5, NORMAL MODE. This will restart the phone in normal mode after flash. Very usefull in usb flashing.
- Moved dct4 unlock codes from INF to UNLOCK option. This will speedup the info process
- small bugs corrected.

 

[大连小潘]

[strike][/strike]Hi

New JAF ver 1.97 beta12

- fixed dct4 lifetimer reset function. It will not cause contrast problem on 11xx phones.
- improved N73 usb flashing to support CNT file.
- improved N80 usb flashing to support APE Variant file corectly.
- corrected problem with LCK option in manual mode.
- added Imei tool in main jaf software. For UK version you must edit jaf.ini and write VALUE=0 to disable dct4/dct3 imei tool.
- added pkey applets support for future addons.
- improved pkey update procedure.
- added E50 usb flashing support. Still in beta mode.
- improved BB5 usb flashing
- other small bugs corrected.

 

[大连小潘]

New jaf ver 1.97 beta13

- added support for E50 usb flashing, final and tested.
- greatly improved usb flashing for BB5 E series and N series
- added E50 fbus flashing for UFS interface
- improved DCT4 booting phone in flashing mode. This solves dead 11xx phones flashing.

It's strongly recommended to use this latest version especialy for E series usb flashing.
For damaged imei a solution is under way.

JAF version 1.97 beta13
Detected PKEY: 80000000
Card life counter: 98.98%
P-key nokia module version 01.00
FBUS INTERFACE NOT CONNECTED!!!
Changing mode...Done!
Detected P-KEY: 80000000
P-key nokia module version 01.00
Init usb communication...
Reading product code...
Product Code: 0536381

FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\products\RM-170\RM170p_06271.C01
PPM Flash file: C:\Program Files\Nokia\Phoenix\products\RM-170\RM170p_06271.L13
CNT Flash file: C:\Program Files\Nokia\Phoenix\products\RM-170\RM170_EMEA.U01
APE Variant file: NONE
Backing up CRT...
Detected P-KEY: 80000000
P-key nokia module version 01.00
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\351_CRT_backup_11739.pm
Done!
Backup CRT OK!
Searching for phone...Detected P-KEY: 80000000
P-key nokia module version 01.00
Init usb communication...
Found
Reading battery value...4647 mV
Init usb flashing...
Reading flashid... CMT: 22FE00EC, APE: 00000000
Verifing ADL communication... Status byte 2
ADL->Loader: Update Application Loader -> Single Chip
Loader len: 218112, CHK: 0x806B
ADL -> Sending loader...
.................................................. .................................................. ..............
Waiting for the phone to boot...
Phone is in flash mode...
CMT blocks: 275, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\products\RM-170\RM170p_06271.C01...
Erasing cmt zone 00380000 - 01F7FFFF ...
Erasing cmt zone 00000400 - 000006BF ...
Erasing cmt zone 000006C0 - 0000FFFF ...
Erasing cmt zone 00010000 - 000105FF ...
Erasing cmt zone 00010600 - 00010FFF ...
Erasing cmt zone 00011000 - 00011FFF ...
Erasing cmt zone 00012000 - 00013FFF ...
Erasing cmt zone 00020000 - 0013FFFF ...
Erasing cmt zone 00140000 - 0032FFFF ...
Erasing cmt zone 00330000 - 0033FFFF ...
Erasing cmt zone 00340000 - 0037FBFF ...
Erasing cmt zone 0037FC00 - 0037FFFF ...
Erasing cmt zone 01FA0000 - 01FEFFFF ...
Erasing cmt zone 00000000 - 012FFFFF ...

Processing C:\Program Files\Nokia\Phoenix\products\RM-170\RM170_EMEA.U01...
Erasing cmt zone 03600000 - 07CFFFFF ...
Processing C:\Program Files\Nokia\Phoenix\products\RM-170\RM170p_06271.L13...
Erasing cmt zone 01300000 - 035FFFFF ...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\products\RM-170\RM170p_06271.C01...
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
cmt->Rootkey hash detected
cmt->Matching CERTIFICATE_DATA_BB5 block detected
Processing C:\Program Files\Nokia\Phoenix\products\RM-170\RM170_EMEA.U01...
Processing C:\Program Files\Nokia\Phoenix\products\RM-170\RM170p_06271.L13...
Rebooting...
Pooling phone...
MCUSW: V 2.26.01
04-07-06
RM-170
(c) Nokia.
APESW: V 06.27.1.0
10-07-2006
RM-170
(c) Nokia
VariantSW: V 06.27.1.0
10-07-2006
RM-170 13
(c) Nokia
Prodcode: 0536381
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 1 seconds...
Done!
Done!

 

[大连小潘]

New jaf 1.97 beta14

- fixed problem with kaspersky antivirus
- added Status Bar with info about Type,Version,Imei and time
- fixed crashing problem with ??????????? imei when reading info in DCT4
- fixed NO answer problem in RPL208 saving causing disabled commands
- added a loaders update system in update tab. Press check then download. For example for a quick refresh with latest loaders, delete all files from odeon/jaf/flash folder (don't delete flash folder) then press check and download all.

 

[大连小潘]

Hi

Finaly a setup it's ready.

JAF 1.97 final

- fixed crash when selecting model in DCT3
- improved status bar info for DCTL and DCT3
- improved USER CODE reading for BB5
- improved update system for loaders.
- other small bugs fixed

Updated setup with latest fia loaders (6.032.029).
Updated setup with latest jaf box driver.
Removed imei patch files from setup.
Removed imei tool from setup.

UNINSTALL FIRST OLD VERSION

 

[大连小潘]

New jaf 1.98 beta1

- fixed reading security code in usb mode
- fixed reading security code in fbus mode for DCT4 INFO
- fixed RPL208 save
- fixed APE Variant manual selection in USB mode for BB5
- fixed N80 usb flashing for content (search, fprot etc)
- other small bugs fixed.

 

[大连小潘]

Hi

New JAF version 1.98 beta2 ready...

- added simlock file upload for DCT4
- fixed erase timeout for bb5 flashing (causing 3250 flashing to have erase error)
- other small fixes

 

[大连小潘]

Hi

New jaf 1.98 beta3 is ready.

- fixed bug with Manual Make INI, software freeze and need to be restarted.
- fixed bug with Manual Make INI, when you cancel models selection JAF_.ini file was created.
- added DCT4 simlock file upload for USB also.
- added Factory settings for DCT4 and BB5 in USB mode
- added support for new product ini for DCT4 (2610 etc), USE INI should work on this phone also
- Fixed bug with jaflog.txt missing causing software to crash.
- added APE version instead of MCU version in status bar for APE phones.
- Fixed Disconnect not available when flashing BB5 phone in usb mode and no fbus interface was connected.
- Fixed some bugs with usb communications.

YOU MUST HAVE 1.97 SETUP INSTALLED.

 

[大连小潘]

New JAF 1.98 beta4 ready....


- added support for Fia loaders 6.35.036
- fixed bug with factory reset in dct4 (usb communication was always selected)

 

[大连小潘]

New JAF Logger 1.12

- recompiled version of 1.11 to fix karsperky antivirus bug.

 

[大连小潘]

Hi

New version JAF 1.98 beta5

- improved bb5 usb flashing to support user file without erase blocks (Now you can flash music file for N70 for ex)
- added Skip ape function for bb5 flashing
- added skip afp for bb5 flashing
- added erase pm function for bb5 fbus
- fixed a bug with erase pm function
- improved use ini function
- improved DCT4 tab buttons
- fixed some small bugs

 

[大连小潘]

Hi


New jaf setup is ready.

- added UPD files flashing for BB5 using fbus. (ex. music file for N70, cnt file for N93 etc)
- added UEM IMEI read for dct4 (IMEI TOOL)
- improved phone type selection when use ini, now with double click you can select the phone.
- corrected some reported bugs.


You must uninstall before installing new setup.

 

[大连小潘]

JAFSETUP_1.98.2



- added DCT4 CS patch for 6610i and 7250i in imei tool

- corrected N73 usb flash problem for ME firmware

- fixed crash when reading incorrect simlock data

- fixed gallery problem when flashing 7373 etc on usb and fbus

- added ESN UEM read for DCT4

- added tracker login option

- fixed security code reading on fbus

- fixed gallery problem on 6085

- added new loaders

- other minor bugs fixed

 

[大连小潘]

JAFSETUP 1.98.3



- added unlock for 1110i, 1112 and 2310 (lock, unlock, autolock etc)



Method of unlock (same as imei patch):



1. Flash the phone with latest version

2. Press unlock, select same mcu file as your phone version

3. After finish make full flash



Tested with RH-93 ver 6.0 and Rm-189 ver 3.31

JAF version 1.98.3
Detected PKEY: 00AA55AA
Card life counter: 95.93%
P-key nokia module version 01.00
Detected JAF INTERFACE version: 01.AC
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
Powering the phone...
Unlocking...
IMEI: 3536530
ASIC: 2
Selected flash file: E:\Nokia Flashes\Products\rm-189\rm189_03.310
Decrypting flash...
Encrypting....
Unlock found!

MCU ID: 0x2201
Algo is ready...
Erasing area: 01160000 - 0116FFFF...
Unlocking...
Checking locks...

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!
DCT4 unlock counter: 32
Powering the phone...
Unlocking...
IMEI: 3536530
ASIC: 2
Selected flash file: E:\Nokia Flashes\Products\rm-189\rm189_03.310
Decrypting flash...
Encrypting....
Unlock found!

MCU ID: 0x2201
Algo is ready...
Erasing area: 01160000 - 0116FFFF...
Unlocking...
Checking locks...

Block 1:
Lock 1: CLOSED -> Lock Data: 22610F Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!
DCT4 unlock counter: 33

 

[大连小潘]

JAFSETUP 1.98.4



- added auto restore for unlocking 1112, 1110i and 2310. You don't need to full flash the phone now

 

[大连小潘]

New JAF version 1.98.5 ready

- fixed DCT3 reading flash id
- improved communication using UFS box
- added DRAG&DROP option to select flash files in DCT4 and BB5
- added 1112b unlock (some versions not supported, try to flah with 5.03 version before unlock)
- improved unlocking for dct4+, version is reading and correct folder is prompted
- improved USE INI function
- improved communication using JAF BOX
- added DOWNGRADE BB5 option for fbus mode (Thx to Dejan Hints)
- other small bugs fixed

 

[大连小潘]

Hi

New JAF software version 1.98.6 ready.

- added easy cable support for dct4+ unlocking
- added Read ASK, Write RPL functions for BB5
- added SX4 authorization for PM using local SX4 card or server.
- added certificate backup as automatic operation when flashing bb5 in fbus mode
- fixed some minor bugs.

Now about ask, rpl:
With jaf you can generate original encrypted files and write original encrypted rpls. In jaf.ini you have a option to set dongle sn for ask generation. Hopefully next week a rpl service for bb5 will be available for jaf users. More news about this when time comes.

About certificates backup:
JAF saves both NPC and VARIANT certificate as RPL file.
So in worst case scenario if something wrong happend with flashing and you have both imei and simlock data lost, you can restore your phone with pm and rpl file saved.

Quick tutorial to fully restore (IF YOU HAVE THE BACKUP RPL AND PM):

1. Erase the phone with erase files
2. Full flash the phone with latest version. After flash imei should be 123456...
3. Write lockdata PM file (important to be written first)
4. Write RPL backup file as plain rpl (in this moment the phone should have imei restored and simlock data ok, but have contact service or contact retailer)
5. Make SX4 auth
6. Write good pm from same phone type WITHOUT FIELD 308

 

[大连小潘]

--------------------------------------------------------------------------------

New JAF version 1.98.7 ready

- added unlock for 2610, 6030b, 6060v, 1112i.
- improved certificate backup
- other small bugs fixed

 

[大连小潘]

New JAF vesion 1.98.8

- added unlock for 1110b and 2626