S308刷机出现ERROR_TOO_MANY_RETRIES错误!大家帮我看看

Y

yqwork

普通会员
2004-04-19
6
0
0
I E23 14:07:19 PC transfer speeds (COM1): 57600 115200
I E24 14:07:19 Loading S-record file: <C:\S3M_OPTI\S300M.sre>, RangeCheck=Off
I E25 14:07:19 There is 1 memory region in the S-record file:
I E26 14:07:19 1: 0x00000000 - 0x000043ff = 17408 Bytes
I E27 14:07:19 Loading S-record file: <C:\S3M_C1.sre>, RangeCheck=On
I E28 14:07:21 There is 1 memory region in the S-record file:
I E29 14:07:21 1: 0x00000000 - 0x00ffffff = 16777216 Bytes
I E30 14:07:21 Power on mobile !
I E31 14:07:27 Flash loader version: V3.52
I E32 14:07:27 Mobile transfer speeds: 57600, 115200, 230400, 460800
I E33 14:07:27 Detected flash chips: 2
I E34 14:07:27 1: Manufacturer: 0x89, Device: 0x8855
I E35 14:07:27 2: Manufacturer: 0x89, Device: 0x8854
I E36 14:07:27 0x89/0x8855: Intel 28F640xW30, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E37 14:07:27 0x89/0x8854: Intel 28F640xW30_, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E38 14:07:27 Total flash size: 16 MB (16777216 Bytes) in 270 sectors
I E39 14:07:27 There are no reserved regions defined
I E40 14:07:27 Data to be transferred: 16 MB (16777216 Bytes)
I E41 14:07:43 Error code: ERROR_TOO_MANY_RETRIES
E E42 14:07:43 Sorry, an error has occured ! (ERROR_TOO_MANY_RETRIES)
(上面的是LOG提示)
我的是300MC1版的,原来刷错了软件,不开机了,因没备份,现在刷网上下来的备份出现这个错误!刷好开机白屏~~~刷F4版可以用!
麻烦哪位大虾帮我看看是什么错误!
 
Y

yqwork

普通会员
2004-04-19
6
0
0
I E23 14:07:19 PC transfer speeds (COM1): 57600 115200
I E24 14:07:19 Loading S-record file: <C:\S3M_OPTI\S300M.sre>, RangeCheck=Off
I E25 14:07:19 There is 1 memory region in the S-record file:
I E26 14:07:19 1: 0x00000000 - 0x000043ff = 17408 Bytes
I E27 14:07:19 Loading S-record file: <C:\S3M_C1.sre>, RangeCheck=On
I E28 14:07:21 There is 1 memory region in the S-record file:
I E29 14:07:21 1: 0x00000000 - 0x00ffffff = 16777216 Bytes
I E30 14:07:21 Power on mobile !
I E31 14:07:27 Flash loader version: V3.52
I E32 14:07:27 Mobile transfer speeds: 57600, 115200, 230400, 460800
I E33 14:07:27 Detected flash chips: 2
I E34 14:07:27 1: Manufacturer: 0x89, Device: 0x8855
I E35 14:07:27 2: Manufacturer: 0x89, Device: 0x8854
I E36 14:07:27 0x89/0x8855: Intel 28F640xW30, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E37 14:07:27 0x89/0x8854: Intel 28F640xW30_, 64 Mbit (8 MB (8388608 Bytes) in 135 sectors)
I E38 14:07:27 Total flash size: 16 MB (16777216 Bytes) in 270 sectors
I E39 14:07:27 There are no reserved regions defined
I E40 14:07:27 Data to be transferred: 16 MB (16777216 Bytes)
I E41 14:07:43 Error code: ERROR_TOO_MANY_RETRIES
E E42 14:07:43 Sorry, an error has occured ! (ERROR_TOO_MANY_RETRIES)
(上面的是LOG提示)
我的是300MC1版的,原来刷错了软件,不开机了,因没备份,现在刷网上下来的备份出现这个错误!刷好开机白屏~~~刷F4版可以用!
麻烦哪位大虾帮我看看是什么错误!
 
N

neon_2

普通会员
2004-03-16
141
0
0
不会是刷机太频了吧，机器要罢工？？？？
哈哈哈哈哈
 
S

syzf520

普通会员
2003-06-02
134
0
0
我遇到过这个问题，可能是你的电脑速度不够快，可以换一台电脑再刷机试试，我就是这样解决的。
 
Y

yqwork

普通会员
2004-04-19
6
0
0
I E4252 10:11:35 Sector: 267
I E4253 10:11:35 OpenSector: 267, 0x00fd0000, 65536, 0x08
I E4254 10:11:35 SendData: 0x00fd0000 - 0x00fd3fff
I E4255 10:11:36 SendData: 0x00fd4000 - 0x00fd7fff
I E4256 10:11:38 SendData: 0x00fd8000 - 0x00fdbfff
I E4257 10:11:39 SendData: 0x00fdc000 - 0x00fdffff
I E4258 10:11:41 EraseSector: 267, 0x00fd0000, 65536, 0x00000000
I E4259 10:11:42 CloseSector: 267
I E4260 10:11:42 Sector: 268
I E4261 10:11:42 OpenSector: 268, 0x00fe0000, 65536, 0x08
I E4262 10:11:42 SendData: 0x00fe0000 - 0x00fe3fff
I E4263 10:11:44 SendData: 0x00fe4000 - 0x00fe7fff
I E4264 10:11:45 SendData: 0x00fe8000 - 0x00febfff
I E4265 10:11:47 SendData: 0x00fec000 - 0x00feffff
I E4266 10:11:48 EraseSector: 268, 0x00fe0000, 65536, 0x00000000
I E4267 10:11:49 CloseSector: 268
I E4268 10:11:49 Sector: 269
I E4269 10:11:49 OpenSector: 269, 0x00ff0000, 65536, 0x08
I E4270 10:11:49 SendData: 0x00ff0000 - 0x00ff3fff
I E4271 10:11:51 SendData: 0x00ff4000 - 0x00ff7fff
I E4272 10:11:52 SendData: 0x00ff8000 - 0x00ffbfff
I E4273 10:11:54 SendData: 0x00ffc000 - 0x00ffffff
I E4274 10:11:55 EraseSector: 269, 0x00ff0000, 65536, 0x00000000
I E4275 10:11:55 Cmd ERAS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E4276 10:11:56 Giving up on EraseSector
I E4277 10:11:56 SendFile: 14 (ERR_TOO_MANY_RETRIES)
I E4278 10:11:56 ReLoad: 14 (ERR_TOO_MANY_RETRIES)
I E4279 10:11:56 Error code: ERR_TOO_MANY_RETRIES
E E4280 10:11:56 Sorry, an error has occured ! (ERR_TOO_MANY_RETRIES)
I E4281 10:11:56 ThreadProtocol finished
I E4282 10:11:56 ThreadProtocol: 14
I E4283 10:11:56 ThreadGUI finished
 
Y

yqwork

普通会员
2004-04-19
6
0
0
I E1884 9:37:28 CloseSector: 267
I E1885 9:37:28 Sector: 268
I E1886 9:37:28 OpenSector: 268, 0x00fe0000, 65536, 0x11
I E1887 9:37:28 SendData: 0x00fe0000 - 0x00fe3fff
I E1888 9:37:30 SendData: 0x00fe4000 - 0x00fe7fff
I E1889 9:37:31 SendData: 0x00fe8000 - 0x00febfff
I E1890 9:37:33 SendData: 0x00fec000 - 0x00feffff
I E1891 9:37:34 CloseSector: 268
I E1892 9:37:35 Sector: 269
I E1893 9:37:35 OpenSector: 269, 0x00ff0000, 65536, 0x11
I E1894 9:37:35 SendData: 0x00ff0000 - 0x00ff3fff
I E1895 9:37:36 SendData: 0x00ff4000 - 0x00ff7fff
I E1896 9:37:38 SendData: 0x00ff8000 - 0x00ffbfff
I E1897 9:37:39 SendData: 0x00ffc000 - 0x00ffffff
I E1898 9:37:41 CloseSector: 269
I E1899 9:37:41 Cmd CLOS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E1900 9:37:41 Retry 1: CloseSector
I E1901 9:37:41 CloseSector: 269
I E1902 9:37:41 Cmd CLOS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E1903 9:37:41 Retry 2: CloseSector
I E1904 9:37:41 CloseSector: 269
I E1905 9:37:41 Cmd CLOS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E1906 9:37:41 Retry 3: CloseSector
I E1907 9:37:41 CloseSector: 269
I E1908 9:37:41 Cmd CLOS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E1909 9:37:41 Retry 4: CloseSector
I E1910 9:37:41 CloseSector: 269
I E1911 9:37:41 Cmd CLOS FAILED: Err:502, 269=0x10d, 16711680=0xff0000, 5=0x5, 162=0xa2
I E1912 9:37:41 Giving up on CloseSector
I E1913 9:37:41 SendFile: 14 (ERR_TOO_MANY_RETRIES)
I E1914 9:37:41 ReLoad: 14 (ERR_TOO_MANY_RETRIES)
I E1915 9:37:41 Error code: ERR_TOO_MANY_RETRIES
E E1916 9:37:41 Sorry, an error has occured ! (ERR_TOO_MANY_RETRIES)
I E1917 9:37:41 ThreadProtocol finished
I E1918 9:37:41 ThreadProtocol: 14
I E1919 9:37:41 ThreadGUI finished
I E1920 9:38:37 ThreadGUI started
 
您必须登录或注册才可回复。
顶部 底部